Hallo,
gibt es eine Möglichkeit die Shield per LAN Kabel zu verbinden?
Nur um das WLAN als Fehlerquelle ausschließen zu können.
Beiträge von syntax888
-
-
Gibt mittlerweile auch ein Plugin dafür. Einfach das Plugin installieren, fertig.
Hallo,
hört sich interessant an.
Wie heißt das Plugin? -
Keine Ahnung. Bei mir stand es unter inaktive Plugins bzw. Material Skin weiter unten drin.
Ich kann das jetzt nicht mehr zeigen, da es jetzt bei den aktiven Plugins bei mir steht.Was für eine LMS hast Du denn da? Ich benutze hier LMS 8.1.2. Aber ich habe Material Skin auch schon mit LMS 7.x schon benutzt.
Ich würde auch nicht das Material Skin über die Oberfläche als Bedienoberfläche einstellen wie Du jetzt etwas anderes als Standard eingestellt hattest, sondern es über den angegebenen Link von mir aufzurufen.
Habe jetzt mal den Unraid-Server neu gestartet. Nun sehe ich im LMS auch das Material Plugin - k.A. wie das kann.
Auf jeden Fall sieht das echt gut aus. IPeng ist damit tatsächlich fast überflüssig geworden. -
Wenn ich unter "Plugins" den zusätzlichen Repo von @carsten_h eingebe und den Server neu starte, bekomme ich den Skin leider immer noch nicht angezeigt.
Was mache ich falsch? -
Bei mir hat sich das ganze Menue vom LMS gerade geändert. Was habe ich denn jetzt gemacht?
![[ag]](https://www.kodinerds.net/wcf/images/smilies/smiley44.gif "ag")
OK, Ansicht "Standard" passt dann wieder.
Den Material Skin finde ich leider immer noch nicht.
Ich suche weiter -
Ist doch nicht schweer, unter den noch nicht aktivierten: Danach nutzt du kein ipeng mehr, und kostet nichts.
Bei mir hat sich das ganze Menue vom LMS gerade geändert. Was habe ich denn jetzt gemacht?
-
Das musst Du einfach bei dem LMS Plugins installieren und dann kannst Du über http://<LMS-Server>:9000/material darauf zugreifen. Den Link dann mit Teilen/Zum Home Bildschirm als Webapp sichern. Das läuft dann im Fullscreen ohne URL Leiste etc.
Bei den LMS Plugins finde ich den Material Skin leider nicht. Heißt das irgendwie anders?
-
@carsten_h
Ja, dass sich der Pi langweilt habe ich mir schon gedacht, wollte aber auf der sicheren Seite sein.
Das mit dem Material Skin werde ich mir auf jeden Fall ansehen! Danke für den Tipp! -
Hallo liebe Nerds,
bin jetzt auch in die HifiBerry Welt eingestiegen (PiCorePlayer mit RaspberryPi 4 4GB RAM, DAC+ Pro, LMS im Docker mit unRaid) und klanglich sehr zufrieden.
Aber ist schon wirklich sehr umfangreich , was man alles konfigurieren kann. Auch mit iPeng muss ich mich erst einmal genauer auseinandersetzen. Sehr spannend alles...... -
So, nun funktioniert es aber
Ich war immer noch auf dem TBS Treiber. Nachdem ich auf den Digital Devices Treiber gewechselt habe, funktioniert es auch vernünftig.
Besten Dank an alle für die geduldige Hilfestellung!Gruß
Syntax -
Irgendwie läuft es bei mir noch nicht richtig.
Ich habe schon wieder keinen kompletten Zugriff auf meine Karte, die LNBs lassen sich nicht mehr konfigurieren (Universal LNB, Switch...)
Auch mit erneutem chmod -R 777 /dev/dvb geht es nicht.
Wie kann das denn jetzt? -
Prima, dann musst du dir das in deiner go datei so rein machen, nach einem reboot ist das wieder auf "default"
Das kommt wenn der docker user nicht root ist und oder auf das device keine lese Berechtigungen für user hat, vermutlich klappt das auch wenn der docker auf "privileged" läuft.
**edit
Das könnte mann im UR Forum mal anmerken, das nach dem kernel Modul gelade, das erstellte device automatisch, mindestens aber für den default User (99) oder alle in der gruppe (100) berechtigungen haben.Als "privileged" funktioniert leider nicht. Wo finde ich denn die go Datei und wie passe ich die an?
-
Super, das war es, DeBaschdi!!
Allerbesten Dank @DeBaschdi und @BJ1 für eure Hilfe!
Wie kommt so ein Rechteproblen denn zustande?
-
Jupp, der Server wurde nach jedem Treiberwechsel neu gestartet.
-
Danke erstmal, dass ihr euch die Zeit nehmt!
Bei mir sieht das beim DVB-Plugin tatsächlich etwas anders aus, bei den LE Treibern sieht es genauso aus:
[xattach=48193][/xattach]Ist ein TwinTuner-Modul
So sieht jetzt mein DVB-Eintrag beim TVH Docker aus:
[xattach=48194][/xattach]Leider werden immer noch keine Adapter bei TVH angezeigt.
-
Hallo,
mit den LibreElec Treibern findet TVH leider auch keine Adapter.
Ich habe nochmal die Ausgabe von dmesg angehängt. -
Hallo,
hier mal die verschiedenen Ausgaben von Unraid
root@Tower:~# ls -l /dev/dvb/adapter*
/dev/dvb/adapter0:
total 0
crw-rw---- 1 root video 212, 0 Dec 23 14:41 demux0
crw-rw---- 1 root video 212, 1 Dec 23 14:41 dvr0
crw-rw---- 1 root video 212, 3 Dec 23 14:41 frontend0
crw-rw---- 1 root video 212, 2 Dec 23 14:41 net0
/dev/dvb/adapter1:
total 0
crw-rw---- 1 root video 212, 4 Dec 23 14:41 demux0
crw-rw---- 1 root video 212, 5 Dec 23 14:41 dvr0
crw-rw---- 1 root video 212, 7 Dec 23 14:41 frontend0
crw-rw---- 1 root video 212, 6 Dec 23 14:41 net0root@Tower:~# dmesg | grep -i ddbridge
[ 24.012081] ddbridge 0000:03:00.0: device name: Digital Devices Cine S2 V7 Advanced DVB adapter
[ 24.012097] ddbridge 0000:03:00.0: HW 00010007 REGMAP 00010005
[ 24.012143] ddbridge 0000:03:00.0: using 1 MSI interrupt(s)
[ 24.012159] ddbridge 0000:03:00.0: link 0 vendor dd01 device 0006 subvendor dd01 subdevice 0024
[ 24.127055] ddbridge 0000:03:00.0: Port 0: Link 0, Link Port 0 (TAB 1): DUAL DVB-S2
[ 24.127057] ddbridge 0000:03:00.0: init link 0, input 0, regs 00000200
[ 24.127058] ddbridge 0000:03:00.0: init link 0, input 1, regs 00000210
[ 24.128153] ddbridge 0000:03:00.0: Port 1: Link 0, Link Port 1 (TAB 2): NO MODULE
[ 24.129346] ddbridge 0000:03:00.0: Port 2: Link 0, Link Port 2 (TAB 3): NO MODULE
[ 24.130481] ddbridge 0000:03:00.0: Port 3: Link 0, Link Port 3 (TAB 4): NO MODULE
[ 24.130554] ddbridge 0000:03:00.0: 0 netstream channels
[ 24.130555] dvbdev: DVB: registering new adapter (DDBridge)
[ 24.130555] dvbdev: DVB: registering new adapter (DDBridge)
[ 24.155618] ddbridge 0000:03:00.0: DVB: registering adapter 0 frontend 0 (STV0910)...
[ 24.158785] ddbridge 0000:03:00.0: DVB: registering adapter 1 frontend 0 (STV0910)...
[ 49.413229] Modules linked in: macvlan xt_CHECKSUM ipt_REJECT ip6table_mangle ip6table_nat iptable_mangle ip6table_filter ip6_tables vhost_net tun vhost vhost_iotlb tap xt_nat veth xt_MASQUERADE iptable_filter iptable_nat nf_nat ip_tables xfs nfsd lockd grace sunrpc md_mod ddbridge(O) cxd2099(O) lnbp21(O) stv0367dd(O) tda18212dd(O) stv090x(O) stv6110x(O) mxl5xx(O) stv6111(O) drxk(O) stv0910(O) lnbh25(O) cxd2843(O) dvb_core(O) x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm wmi_bmof crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel crypto_simd cryptd r8169 glue_helper rapl i2c_i801 i2c_smbus intel_cstate i2c_core realtek intel_uncore ahci libahci wmi thermal fan video backlight button acpi_padDie komplette dmesg Ausgabe habe ich als txt-Dokument angehängt.
Besten Dank erst einmal für die Hilfe!
-
Das sieht nicht gut aus:
[ 23.979134] dvb_core: loading out-of-tree module taints kernel.
[ 24.011974] Digital Devices PCIE bridge driver 0.9.38, Copyright (C) 2010-19 Digital Devices GmbH
[ 24.012081] ddbridge 0000:03:00.0: device name: Digital Devices Cine S2 V7 Advanced DVB adapter
[ 24.012097] ddbridge 0000:03:00.0: HW 00010007 REGMAP 00010005
[ 24.012143] ddbridge 0000:03:00.0: using 1 MSI interrupt(s)
[ 24.012159] ddbridge 0000:03:00.0: link 0 vendor dd01 device 0006 subvendor dd01 subdevice 0024
[ 24.127055] ddbridge 0000:03:00.0: Port 0: Link 0, Link Port 0 (TAB 1): DUAL DVB-S2
[ 24.127057] ddbridge 0000:03:00.0: init link 0, input 0, regs 00000200
[ 24.127058] ddbridge 0000:03:00.0: init link 0, input 1, regs 00000210
[ 24.128153] ddbridge 0000:03:00.0: Port 1: Link 0, Link Port 1 (TAB 2): NO MODULE
[ 24.129346] ddbridge 0000:03:00.0: Port 2: Link 0, Link Port 2 (TAB 3): NO MODULE
[ 24.130481] ddbridge 0000:03:00.0: Port 3: Link 0, Link Port 3 (TAB 4): NO MODULE
[ 24.130554] ddbridge 0000:03:00.0: 0 netstream channels
[ 24.130555] dvbdev: DVB: registering new adapter (DDBridge)
[ 24.130555] dvbdev: DVB: registering new adapter (DDBridge)
[ 24.153346] LNBH25 on 08
[ 24.155618] ddbridge 0000:03:00.0: DVB: registering adapter 0 frontend 0 (STV0910)...
[ 24.156579] LNBH25 on 09
[ 24.158785] ddbridge 0000:03:00.0: DVB: registering adapter 1 frontend 0 (STV0910)...Heisst das, dass die Treiber von dem Unraid Plugin "DVB-Driver" nicht passen?
-
Ich habe nun die Digital Devices Treiber geladen.
Das sagt dmesg | grep -i dvb:root@Tower:~# dmesg | grep -i dvb
[ 23.979134] dvb_core: loading out-of-tree module taints kernel.
[ 24.012081] ddbridge 0000:03:00.0: device name: Digital Devices Cine S2 V7 Advanced DVB adapter
[ 24.127055] ddbridge 0000:03:00.0: Port 0: Link 0, Link Port 0 (TAB 1): DUAL DVB-S2
[ 24.130555] dvbdev: DVB: registering new adapter (DDBridge)
[ 24.130555] dvbdev: DVB: registering new adapter (DDBridge)
[ 24.155618] ddbridge 0000:03:00.0: DVB: registering adapter 0 frontend 0 (STV0910)...
[ 24.158785] ddbridge 0000:03:00.0: DVB: registering adapter 1 frontend 0 (STV0910)...
[ 49.413229] Modules linked in: macvlan xt_CHECKSUM ipt_REJECT ip6table_mangle ip6table_nat iptable_mangle ip6table_filter ip6_tables vhost_net tun vhost vhost_iotlb tap xt_nat veth xt_MASQUERADE iptable_filter iptable_nat nf_nat ip_tables xfs nfsd lockd grace sunrpc md_mod ddbridge(O) cxd2099(O) lnbp21(O) stv0367dd(O) tda18212dd(O) stv090x(O) stv6110x(O) mxl5xx(O) stv6111(O) drxk(O) stv0910(O) lnbh25(O) cxd2843(O) dvb_core(O) x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm wmi_bmof crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel crypto_simd cryptd r8169 glue_helper rapl i2c_i801 i2c_smbus intel_cstate i2c_core realtek intel_uncore ahci libahci wmi thermal fan video backlight button acpi_padBringt der komplette dmesg Auszug vielleicht mehr?
Spoiler anzeigen
[ 14.528222] BOOT_IMAGE=/bzimage
[ 14.616114] random: udevd: uninitialized urandom read (16 bytes read)
[ 14.616220] random: udevd: uninitialized urandom read (16 bytes read)
[ 14.616298] random: udevd: uninitialized urandom read (16 bytes read)
[ 14.618490] udevd[1250]: starting eudev-3.2.5
[ 14.707152] random: fast init done
[ 15.896015] random: crng init done
[ 15.896102] random: 7 urandom warning(s) missed due to ratelimiting
[ 16.651540] overlayfs: upper fs does not support xattr, falling back to index=off and metacopy=off.
[ 16.659720] overlayfs: upper fs does not support xattr, falling back to index=off and metacopy=off.
[ 16.921455] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 16.921549] ACPI: Sleep Button [SLPB]
[ 16.921625] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 16.921706] ACPI: Power Button [PWRB]
[ 16.921784] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 16.925761] ACPI: Power Button [PWRF]
[ 17.049107] thermal LNXTHERM:00: registered as thermal_zone0
[ 17.049160] ACPI: Thermal Zone [TZ00] (28 C)
[ 17.049342] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 17.049478] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 17.079126] EDAC ie31200: No ECC support
[ 17.079202] EDAC ie31200: No ECC support
[ 17.100028] ahci 0000:00:17.0: version 3.0
[ 17.109762] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 17.109866] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 17.110252] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 17.110312] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[ 17.111419] i2c i2c-0: 2/4 memory slots populated (from DMI)
[ 17.111851] i2c i2c-0: Successfully instantiated SPD at 0x50
[ 17.112536] i2c i2c-0: Successfully instantiated SPD at 0x52
[ 17.124444] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 17.124506] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 17.124561] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 17.124615] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 17.124667] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 17.126159] r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 17.127115] scsi host1: ahci
[ 17.127227] scsi host2: ahci
[ 17.127341] scsi host3: ahci
[ 17.127446] scsi host4: ahci
[ 17.127549] scsi host5: ahci
[ 17.127660] scsi host6: ahci
[ 17.127741] ata1: SATA max UDMA/133 abar m2048@0xa1215000 port 0xa1215100 irq 127
[ 17.127807] ata2: SATA max UDMA/133 abar m2048@0xa1215000 port 0xa1215180 irq 127
[ 17.127865] ata3: SATA max UDMA/133 abar m2048@0xa1215000 port 0xa1215200 irq 127
[ 17.127924] ata4: SATA max UDMA/133 abar m2048@0xa1215000 port 0xa1215280 irq 127
[ 17.127982] ata5: SATA max UDMA/133 abar m2048@0xa1215000 port 0xa1215300 irq 127
[ 17.128040] ata6: SATA max UDMA/133 abar m2048@0xa1215000 port 0xa1215380 irq 127
[ 17.135062] libphy: r8169: probed
[ 17.135229] r8169 0000:07:00.0 eth0: RTL8168h/8111h, 04:d9:f5:c9:62:88, XID 541, IRQ 128
[ 17.135285] r8169 0000:07:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 17.143400] cryptd: max_cpu_qlen set to 1000
[ 17.147118] AVX2 version of gcm_enc/dec engaged.
[ 17.147175] AES CTR mode by8 optimization enabled
[ 17.167060] EDAC ie31200: No ECC support
[ 17.436718] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 17.436863] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 17.436989] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 17.437133] ata5: SATA link down (SStatus 4 SControl 300)
[ 17.437749] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 17.437882] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 17.438605] ata3.00: supports DRM functions and may not be fully accessible
[ 17.439351] ata6.00: supports DRM functions and may not be fully accessible
[ 17.440188] ata6.00: ATA-11: Samsung SSD 860 EVO 500GB, S4CNNG0KB01075L, RVT02B6Q, max UDMA/133
[ 17.440322] ata6.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 17.442727] ata6.00: supports DRM functions and may not be fully accessible
[ 17.443330] ata2.00: ATA-9: WDC WD100EFAX-68LHPN0, 2YJHV38D, 83.H0A83, max UDMA/133
[ 17.443435] ata2.00: 19532873728 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 17.443922] ata1.00: ATA-9: WDC WD100EMAZ-00WJTA0, 1EGKPY1Z, 83.H0A83, max UDMA/133
[ 17.444031] ata1.00: 19532873728 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 17.444144] ata4.00: ATA-9: WDC WD100EFAX-68LHPN0, 2YJJUTDD, 83.H0A83, max UDMA/133
[ 17.444245] ata4.00: 19532873728 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 17.445067] ata3.00: ATA-9: WDC WD100EZAZ-11TDBA0, 2YK1MUND, 83.H0A83, max UDMA/133
[ 17.445166] ata3.00: 19532873728 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 17.445782] ata6.00: configured for UDMA/133
[ 17.450619] ata3.00: supports DRM functions and may not be fully accessible
[ 17.452528] ata2.00: configured for UDMA/133
[ 17.453431] ata4.00: configured for UDMA/133
[ 17.453564] ata1.00: configured for UDMA/133
[ 17.453921] scsi 1:0:0:0: Direct-Access ATA WDC WD100EMAZ-00 0A83 PQ: 0 ANSI: 5
[ 17.454406] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 17.454489] sd 1:0:0:0: [sdb] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB)
[ 17.454599] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 17.454702] sd 1:0:0:0: [sdb] Write Protect is off
[ 17.454804] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 17.454840] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 17.454881] scsi 2:0:0:0: Direct-Access ATA WDC WD100EFAX-68 0A83 PQ: 0 ANSI: 5
[ 17.455460] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 17.455502] sd 2:0:0:0: [sdc] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB)
[ 17.455660] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[ 17.455775] sd 2:0:0:0: [sdc] Write Protect is off
[ 17.455865] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 17.455894] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 17.459734] ata3.00: configured for UDMA/133
[ 17.460031] scsi 3:0:0:0: Direct-Access ATA WDC WD100EZAZ-11 0A83 PQ: 0 ANSI: 5
[ 17.460481] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 17.460598] sd 3:0:0:0: [sdd] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB)
[ 17.460704] sd 3:0:0:0: [sdd] 4096-byte physical blocks
[ 17.460822] sd 3:0:0:0: [sdd] Write Protect is off
[ 17.460845] scsi 4:0:0:0: Direct-Access ATA WDC WD100EFAX-68 0A83 PQ: 0 ANSI: 5
[ 17.460912] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 17.463933] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 17.464155] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 17.464309] sd 4:0:0:0: [sde] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB)
[ 17.464413] sd 4:0:0:0: [sde] 4096-byte physical blocks
[ 17.464517] sd 4:0:0:0: [sde] Write Protect is off
[ 17.464607] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 17.464635] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 17.464663] scsi 6:0:0:0: Direct-Access ATA Samsung SSD 860 2B6Q PQ: 0 ANSI: 5
[ 17.465261] ata6.00: Enabling discard_zeroes_data
[ 17.465439] sd 6:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 17.465555] sd 6:0:0:0: [sdf] Write Protect is off
[ 17.465596] sd 6:0:0:0: Attached scsi generic sg5 type 0
[ 17.465650] sd 6:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 17.465785] sd 6:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 17.475067] ata6.00: Enabling discard_zeroes_data
[ 17.475771] sdf: sdf1
[ 17.476403] ata6.00: Enabling discard_zeroes_data
[ 17.476682] sd 6:0:0:0: [sdf] Attached SCSI disk
[ 17.525734] sdb: sdb1
[ 17.526561] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 17.527368] sdc: sdc1
[ 17.528198] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 17.532301] sdd: sdd1
[ 17.532656] sde: sde1
[ 17.533171] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 17.533452] sd 4:0:0:0: [sde] Attached SCSI disk
[ 17.560875] BTRFS: device fsid ac071622-85be-48b1-842a-5b179c0c896f devid 1 transid 22730871 /dev/sdf1 scanned by udevd (1379)
[ 18.238499] EDAC ie31200: No ECC support
[ 18.685794] Generic FE-GE Realtek PHY r8169-700:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-700:00, irq=IGNORE)
[ 18.849934] device eth0 entered promiscuous mode
[ 18.850030] br0: port 1(eth0) entered blocking state
[ 18.850031] br0: port 1(eth0) entered disabled state
[ 18.850040] r8169 0000:07:00.0 eth0: Link is Down
[ 18.850193] br0: port 1(eth0) entered blocking state
[ 18.850194] br0: port 1(eth0) entered forwarding state
[ 18.850243] br0: port 1(eth0) entered disabled state
[ 21.856020] r8169 0000:07:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 21.856028] br0: port 1(eth0) entered blocking state
[ 21.856029] br0: port 1(eth0) entered forwarding state
[ 23.951492] EDAC ie31200: No ECC support
[ 23.979134] dvb_core: loading out-of-tree module taints kernel.
[ 24.011974] Digital Devices PCIE bridge driver 0.9.38, Copyright (C) 2010-19 Digital Devices GmbH
[ 24.012081] ddbridge 0000:03:00.0: device name: Digital Devices Cine S2 V7 Advanced DVB adapter
[ 24.012097] ddbridge 0000:03:00.0: HW 00010007 REGMAP 00010005
[ 24.012143] ddbridge 0000:03:00.0: using 1 MSI interrupt(s)
[ 24.012159] ddbridge 0000:03:00.0: link 0 vendor dd01 device 0006 subvendor dd01 subdevice 0024
[ 24.127055] ddbridge 0000:03:00.0: Port 0: Link 0, Link Port 0 (TAB 1): DUAL DVB-S2
[ 24.127057] ddbridge 0000:03:00.0: init link 0, input 0, regs 00000200
[ 24.127058] ddbridge 0000:03:00.0: init link 0, input 1, regs 00000210
[ 24.128153] ddbridge 0000:03:00.0: Port 1: Link 0, Link Port 1 (TAB 2): NO MODULE
[ 24.129346] ddbridge 0000:03:00.0: Port 2: Link 0, Link Port 2 (TAB 3): NO MODULE
[ 24.130481] ddbridge 0000:03:00.0: Port 3: Link 0, Link Port 3 (TAB 4): NO MODULE
[ 24.130554] ddbridge 0000:03:00.0: 0 netstream channels
[ 24.130555] dvbdev: DVB: registering new adapter (DDBridge)
[ 24.130555] dvbdev: DVB: registering new adapter (DDBridge)
[ 24.153346] LNBH25 on 08
[ 24.155618] ddbridge 0000:03:00.0: DVB: registering adapter 0 frontend 0 (STV0910)...
[ 24.156579] LNBH25 on 09
[ 24.158785] ddbridge 0000:03:00.0: DVB: registering adapter 1 frontend 0 (STV0910)...
[ 28.719206] md: unRAID driver 2.9.17 installed
[ 28.730481] mdcmd (1): import 0
[ 28.730482] md: import_slot: 0 empty
[ 28.730734] mdcmd (2): import 1 sdd 64 9766436812 0 WDC_WD100EZAZ-11TDBA0_2YK1MUND
[ 28.730737] md: import disk1: (sdd) WDC_WD100EZAZ-11TDBA0_2YK1MUND size: 9766436812
[ 28.731027] mdcmd (3): import 2 sdc 64 9766436812 0 WDC_WD100EFAX-68LHPN0_2YJHV38D
[ 28.731030] md: import disk2: (sdc) WDC_WD100EFAX-68LHPN0_2YJHV38D size: 9766436812
[ 28.731284] mdcmd (4): import 3 sde 64 9766436812 0 WDC_WD100EFAX-68LHPN0_2YJJUTDD
[ 28.731286] md: import disk3: (sde) WDC_WD100EFAX-68LHPN0_2YJJUTDD size: 9766436812
[ 28.731540] mdcmd (5): import 4 sdb 64 9766436812 0 WDC_WD100EMAZ-00WJTA0_1EGKPY1Z
[ 28.731542] md: import disk4: (sdb) WDC_WD100EMAZ-00WJTA0_1EGKPY1Z size: 9766436812
[ 28.731553] mdcmd (6): import 5
[ 28.731562] mdcmd (7): import 6
[ 28.731570] mdcmd (8): import 7
[ 28.731578] mdcmd (9): import 8
[ 28.731587] mdcmd (10): import 9
[ 28.731596] mdcmd (11): import 10
[ 28.731604] mdcmd (12): import 11
[ 28.731612] mdcmd (13): import 12
[ 28.731619] mdcmd (14): import 13
[ 28.731627] mdcmd (15): import 14
[ 28.731634] mdcmd (16): import 15
[ 28.731641] mdcmd (17): import 16
[ 28.731649] mdcmd (18): import 17
[ 28.731656] mdcmd (19): import 18
[ 28.731664] mdcmd (20): import 19
[ 28.731671] mdcmd (21): import 20
[ 28.731679] mdcmd (22): import 21
[ 28.731687] mdcmd (23): import 22
[ 28.731695] mdcmd (24): import 23
[ 28.731703] mdcmd (25): import 24
[ 28.731710] mdcmd (26): import 25
[ 28.731718] mdcmd (27): import 26
[ 28.731726] mdcmd (28): import 27
[ 28.731734] mdcmd (29): import 28
[ 28.731740] mdcmd (30): import 29
[ 28.731741] md: import_slot: 29 empty
[ 31.031080] RPC: Registered named UNIX socket transport module.
[ 31.031081] RPC: Registered udp transport module.
[ 31.031081] RPC: Registered tcp transport module.
[ 31.031082] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 31.038709] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 33.117706] mdcmd (31): set md_num_stripes 1280
[ 33.117711] mdcmd (32): set md_queue_limit 80
[ 33.117714] mdcmd (33): set md_sync_limit 5
[ 33.117717] mdcmd (34): set md_write_method
[ 33.191816] mdcmd (35): start STOPPED
[ 33.192339] unraid: allocating 31110K for 1280 stripes (6 disks)
[ 33.194748] md1: running, size: 9766436812 blocks
[ 33.194814] md2: running, size: 9766436812 blocks
[ 33.194868] md3: running, size: 9766436812 blocks
[ 33.194976] md4: running, size: 9766436812 blocks
[ 34.336236] intel_pstate: Turbo disabled by BIOS or unavailable on processor
[ 35.663029] SGI XFS with ACLs, security attributes, no [definition=12,0]debug[/definition] enabled
[ 35.663703] XFS (md1): Mounting V5 Filesystem
[ 35.785057] XFS (md1): Ending clean mount
[ 35.895755] xfs filesystem being mounted at /mnt/disk1 supports timestamps until 2038 (0x7fffffff)
[ 35.923886] XFS (md2): Mounting V5 Filesystem
[ 36.114437] XFS (md2): Ending clean mount
[ 36.224105] xfs filesystem being mounted at /mnt/disk2 supports timestamps until 2038 (0x7fffffff)
[ 36.247612] XFS (md3): Mounting V5 Filesystem
[ 36.407369] XFS (md3): Ending clean mount
[ 36.509988] xfs filesystem being mounted at /mnt/disk3 supports timestamps until 2038 (0x7fffffff)
[ 36.538618] XFS (md4): Mounting V5 Filesystem
[ 36.655178] XFS (md4): Ending clean mount
[ 36.779516] xfs filesystem being mounted at /mnt/disk4 supports timestamps until 2038 (0x7fffffff)
[ 36.823356] BTRFS info (device sdf1): turning on async discard
[ 36.823358] BTRFS info (device sdf1): using free space tree
[ 36.823358] BTRFS info (device sdf1): has skinny extents
[ 36.861904] BTRFS info (device sdf1): enabling ssd optimizations
[ 40.136676] BTRFS: device fsid cb2c4fdb-d2b6-4f3d-9fd0-a8293fd0b78a devid 1 transid 1928813 /dev/loop2 scanned by udevd (5480)
[ 40.137888] BTRFS info (device loop2): using free space tree
[ 40.137892] BTRFS info (device loop2): has skinny extents
[ 40.155933] BTRFS info (device loop2): enabling ssd optimizations
[ 40.817283] process '/tmp/qemu-check502917240/check' started with executable stack
[ 41.714788] docker0: port 1(veth6406200) entered blocking state
[ 41.714789] docker0: port 1(veth6406200) entered disabled state
[ 41.714814] device veth6406200 entered promiscuous mode
[ 41.714855] docker0: port 1(veth6406200) entered blocking state
[ 41.714856] docker0: port 1(veth6406200) entered forwarding state
[ 41.715227] docker0: port 1(veth6406200) entered disabled state
[ 41.716801] BTRFS: device fsid c45dd7de-5393-43ec-b0d1-c96424a7ab84 devid 1 transid 361 /dev/loop3 scanned by udevd (5480)
[ 41.717041] BTRFS info (device loop3): using free space tree
[ 41.717042] BTRFS info (device loop3): has skinny extents
[ 41.726072] BTRFS info (device loop3): enabling ssd optimizations
[ 41.852907] tun: Universal TUN/TAP device driver, 1.6
[ 41.875038] virbr0: port 1(virbr0-nic) entered blocking state
[ 41.875040] virbr0: port 1(virbr0-nic) entered disabled state
[ 41.875067] device virbr0-nic entered promiscuous mode
[ 41.880514] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation
[ 41.938362] eth0: renamed from veth4223b65
[ 41.944406] IPv6: ADDRCONF(NETDEV_CHANGE): veth6406200: link becomes ready
[ 41.944423] docker0: port 1(veth6406200) entered blocking state
[ 41.944424] docker0: port 1(veth6406200) entered forwarding state
[ 41.944464] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
[ 41.983756] virbr0: port 1(virbr0-nic) entered blocking state
[ 41.983757] virbr0: port 1(virbr0-nic) entered listening state
[ 41.996963] virbr0: port 1(virbr0-nic) entered disabled state
[ 42.074922] docker0: port 2(veth0091843) entered blocking state
[ 42.074923] docker0: port 2(veth0091843) entered disabled state
[ 42.074950] device veth0091843 entered promiscuous mode
[ 42.074980] docker0: port 2(veth0091843) entered blocking state
[ 42.074980] docker0: port 2(veth0091843) entered forwarding state
[ 42.284212] eth0: renamed from veth69c1ec6
[ 42.290216] IPv6: ADDRCONF(NETDEV_CHANGE): veth0091843: link becomes ready
[ 42.626828] br0: port 2(vnet0) entered blocking state
[ 42.626829] br0: port 2(vnet0) entered disabled state
[ 42.626861] device vnet0 entered promiscuous mode
[ 42.626978] br0: port 2(vnet0) entered blocking state
[ 42.626978] br0: port 2(vnet0) entered forwarding state
[ 42.773881] eth0: renamed from vethbf5cbf9
[ 42.777775] device br0 entered promiscuous mode
[ 42.921192] docker0: port 3(vethe2845bd) entered blocking state
[ 42.921193] docker0: port 3(vethe2845bd) entered disabled state
[ 42.921218] device vethe2845bd entered promiscuous mode
[ 42.921252] docker0: port 3(vethe2845bd) entered blocking state
[ 42.921252] docker0: port 3(vethe2845bd) entered forwarding state
[ 43.343710] eth0: renamed from vetha66fedf
[ 43.367668] IPv6: ADDRCONF(NETDEV_CHANGE): vethe2845bd: link becomes ready
[ 49.413213] tun: unexpected GSO type: 0x0, gso_size 1440, hdr_len 1506
[ 49.413215] tun: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 49.413216] tun: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 49.413216] tun: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 49.413216] tun: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 49.413225] ------------[ cut here ]------------
[ 49.413229] WARNING: CPU: 0 PID: 7454 at drivers/net/tun.c:2083 tun_do_read+0x37b/0x480 [tun]
[ 49.413229] Modules linked in: macvlan xt_CHECKSUM ipt_REJECT ip6table_mangle ip6table_nat iptable_mangle ip6table_filter ip6_tables vhost_net tun vhost vhost_iotlb tap xt_nat veth xt_MASQUERADE iptable_filter iptable_nat nf_nat ip_tables xfs nfsd lockd grace sunrpc md_mod ddbridge(O) cxd2099(O) lnbp21(O) stv0367dd(O) tda18212dd(O) stv090x(O) stv6110x(O) mxl5xx(O) stv6111(O) drxk(O) stv0910(O) lnbh25(O) cxd2843(O) dvb_core(O) x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm wmi_bmof crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel crypto_simd cryptd r8169 glue_helper rapl i2c_i801 i2c_smbus intel_cstate i2c_core realtek intel_uncore ahci libahci wmi thermal fan video backlight button acpi_pad
[ 49.413247] CPU: 0 PID: 7454 Comm: vhost-7390 Tainted: G O 5.9.13-Unraid #2
[ 49.413247] Hardware name: System manufacturer System Product Name/PRIME B360-PLUS, BIOS 1502 06/26/2019
[ 49.413249] RIP: 0010:tun_do_read+0x37b/0x480 [tun]
[ 49.413250] Code: 00 6a 01 0f b7 44 24 2a b9 10 00 00 00 48 c7 c6 18 82 32 a0 48 c7 c7 1e 82 32 a0 83 f8 40 48 0f 4f c2 31 d2 50 e8 37 a1 fc e0 <0f> 0b 58 5a eb 24 4c 89 e2 be 0a 00 00 00 4c 89 c7 e8 8c 4a fc e0
[ 49.413251] RSP: 0018:ffffc90000723cc0 EFLAGS: 00010286
[ 49.413252] RAX: 0000000000000000 RBX: 000000000000000c RCX: 0000000000000027
[ 49.413252] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff88845ec18880
[ 49.413253] RBP: ffff8881d0316400 R08: 0000000000000003 R09: ffffffff82459900
[ 49.413253] R10: 0000000000000040 R11: 0000000000000068 R12: ffffc90000723e58
[ 49.413254] R13: 00000000000005ee R14: 0000000000000000 R15: 0000000000000000
[ 49.413255] FS: 0000000000000000(0000) GS:ffff88845ec00000(0000) knlGS:0000000000000000
[ 49.413256] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 49.413256] CR2: fffff804538b6058 CR3: 00000004151e4003 CR4: 00000000003726f0
[ 49.413257] Call Trace:
[ 49.413260] tun_recvmsg+0x88/0xcb [tun]
[ 49.413262] handle_rx+0x48d/0x617 [vhost_net]
[ 49.413265] vhost_worker+0x80/0xac [vhost]
[ 49.413266] ? vhost_dev_set_owner+0x22a/0x22a [vhost]
[ 49.413269] kthread+0xe5/0xea
[ 49.413271] ? kthread_flush_worker+0x70/0x70
[ 49.413272] ret_from_fork+0x22/0x30
[ 49.413273] ---[ end trace e57e4ae03e5bd2d2 ]---
[ 49.413333] tun: unexpected GSO type: 0x0, gso_size 1440, hdr_len 1506
[ 49.413333] tun: b0 3c b0 75 dc 6a 05 56 ff 56 0c 3c ff 74 4c a8 .<.u.j.V.V.<.tL.
[ 49.413334] tun: 20 75 3b 8a 5d 10 6a 06 56 ff 56 0c 0f b7 4e 08 u;.].j.V.V...N.
[ 49.413334] tun: 24 40 8b d1 83 e2 02 66 85 d2 74 09 84 c0 74 09 $@.....f..t...t.
[ 49.413335] tun: 66 85 d2 75 0b 84 c0 74 07 83 c9 04 66 89 4e 08 f..u...t....f.N.
[ 49.413457] tun: unexpected GSO type: 0x0, gso_size 1440, hdr_len 1506
[ 49.413457] tun: b8 0b 00 0b 88 b8 b0 bb 97 89 09 89 98 9a 08 a8 ................
[ 49.413458] tun: 98 b8 08 89 98 9a 09 bb 09 bb b8 a0 96 80 07 00 ................
[ 49.413458] tun: 97 9a 08 a9 96 b9 a7 69 0a 00 00 00 00 0b 00 00 .......i........
[ 49.413459] tun: 00 00 00 00 00 00 00 00 bb 0b bb 00 00 00 00 00 ................
[ 49.413880] tun: unexpected GSO type: 0x0, gso_size 1440, hdr_len 1506
[ 49.413881] tun: 00 10 00 00 23 d4 01 80 57 25 34 c0 ab 35 be a5 ....#...W%4..5..
[ 49.413881] tun: 16 62 bb 29 a3 26 0c 00 c4 cd 00 10 e6 35 34 c0 .b.).&.......54.
[ 49.413882] tun: de 98 cc a5 0b d6 54 58 7b 49 00 00 f4 c4 02 80 ......TX{I......
[ 49.413882] tun: 9e 59 34 c0 d3 79 f0 3a f0 b2 ac a0 35 5c 03 00 .Y4..y.:....5\..
[ 49.413893] tun: unexpected GSO type: 0x0, gso_size 1440, hdr_len 1506
[ 49.413893] tun: b0 4f 02 00 43 42 03 00 9e 1d a7 bf d8 21 df b8 .O..CB.......!..
[ 49.413894] tun: 6c 48 e6 08 b0 38 02 00 43 42 03 00 9e 1d a7 bf lH...8..CB......
[ 49.413894] tun: d8 21 df b8 b0 bb 18 46 b0 38 02 00 43 42 03 00 .!.....F.8..CB..
[ 49.413895] tun: 9e 1d a7 bf d8 21 df b8 b9 41 3c 4f b0 38 02 00 .....!...A<O.8..
[ 55.787309] ffdetect[9049]: segfault at 38 ip 00000000004038da sp 00007fffdbb8bb10 error 4 in ffdetect[400000+14000]
[ 55.787313] Code: cc 34 21 00 41 0f b6 6d 00 40 84 ed 75 b7 48 8b 34 24 48 8d 3d 3c a2 00 00 31 c0 ff 15 6f 33 21 00 48 89 df ff 15 8e 34 21 00 <41> 0f b6 2c 24 40 84 ed 0f 84 93 00 00 00 4c 8d 35 a1 a5 00 00 eb
[ 55.852084] ffdetect[9052]: segfault at 38 ip 00000000004038da sp 00007ffce3d0a4c0 error 4 in ffdetect[400000+14000]
[ 55.852088] Code: cc 34 21 00 41 0f b6 6d 00 40 84 ed 75 b7 48 8b 34 24 48 8d 3d 3c a2 00 00 31 c0 ff 15 6f 33 21 00 48 89 df ff 15 8e 34 21 00 <41> 0f b6 2c 24 40 84 ed 0f 84 93 00 00 00 4c 8d 35 a1 a5 00 00 ebIch kann mit dem Log leider nicht viel anfangen.
Gruß
Syntax -
Hallo,
die DD Treiber hatte ich gestern auch schonb einmal probiert - leider mit demselben Ergebnis.
Werde sie jetzt aber vorsichtshalber noch einmal wieder laden.
