Beiträge von epicfail

// Automatically generated configuration file for 'Hyperion daemon'
// Generated by: HyperCon (The Hyperion deamon configuration file builder


{
    /// Device configuration contains the following fields: 
    /// * 'name'       : The user friendly name of the device (only used for display purposes)
    /// * 'type'       : The type of the device or leds (known types for now are 'ws2801', 'ldp8806',
    ///                  'lpd6803', 'sedu', 'adalight', 'lightpack', 'test' and 'none')
    /// * 'output'     : The output specification depends on selected device. This can for example be the
    ///                  device specifier, device serial number, or the output file name
    /// * 'rate'       : The baudrate of the output to the device
    /// * 'colorOrder' : The order of the color bytes ('rgb', 'rbg', 'bgr', etc.).
    "device" :
    {
        "name"       : "HTPC",
        "type"       : "adalight",
        "output"     : "/dev/ttyACM0",
        "rate"       : 115200,
        "colorOrder" : "rgb"
    },


    /// Color manipulation configuration used to tune the output colors to specific surroundings. 
    /// The configuration contains a list of color-transforms. Each transform contains the 
    /// following fields:
    ///  * 'id'   : The unique identifier of the color transformation (eg 'device_1')    ///  * 'leds' : The indices (or index ranges) of the leds to which this color transform applies
    ///             (eg '0-5, 9, 11, 12-17'). The indices are zero based.    ///  * 'hsv' : The manipulation in the Hue-Saturation-Value color domain with the following 
    ///            tuning parameters:
    ///            - 'saturationGain'  The gain adjustement of the saturation
    ///            - 'valueGain'       The gain adjustement of the value
    ///  * 'red'/'green'/'blue' : The manipulation in the Red-Green-Blue color domain with the 
    ///                           following tuning parameters for each channel:
    ///            - 'threshold'       The minimum required input value for the channel to be on 
    ///                                (else zero)
    ///            - 'gamma'           The gamma-curve correction factor
    ///            - 'blacklevel'      The lowest possible value (when the channel is black)
    ///            - 'whitelevel'      The highest possible value (when the channel is white)
    ///
    /// Next to the list with color transforms there is also a smoothing option.
    ///  * 'smoothing' : Smoothing of the colors in the time-domain with the following tuning 
    ///                  parameters:
    ///            - 'type'            The type of smoothing algorithm ('linear' or 'none')
    ///            - 'time_ms'         The time constant for smoothing algorithm in milliseconds
    ///            - 'updateFrequency' The update frequency of the leds in Hz
    "color" :
    {
        "transform" :
        [
            {
                "id"   : "default",
                "leds" : "*",
                "hsv" :
                {
                    "saturationGain" : 1.0000,
                    "valueGain"      : 1.0000
                },
                "red" :
                {
                    "threshold"  : 0.0000,
                    "gamma"      : 1.0000,
                    "blacklevel" : 0.0000,
                    "whitelevel" : 1.0000
                },
                "green" :
                {
                    "threshold"  : 0.0000,
                    "gamma"      : 1.0000,
                    "blacklevel" : 0.0000,
                    "whitelevel" : 1.0000
                },
                "blue" :
                {
                    "threshold"  : 0.0000,
                    "gamma"      : 1.0000,
                    "blacklevel" : 0.0000,
                    "whitelevel" : 1.0000
                }
            }
        ],
        "smoothing" :
        {
            "type"            : "linear",
            "time_ms"         : 100,
            "updateFrequency" : 25.0000
        }
    },


    ///  The configuration for each individual led. This contains the specification of the area 
    ///  averaged of an input image for each led to determine its color. Each item in the list 
    ///  contains the following fields:
    ///  * index: The index of the led. This determines its location in the string of leds; zero 
    ///           being the first led.
    ///  * hscan: The fractional part of the image along the horizontal used for the averaging 
    ///           (minimum and maximum inclusive)
    ///  * vscan: The fractional part of the image along the vertical used for the averaging 
    ///           (minimum and maximum inclusive)
    "leds" : 
    [
        {
            "index" : 0,
            "hscan" : { "minimum" : 0.4667, "maximum" : 0.5000 },
            "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
        },
        {
            "index" : 1,
            "hscan" : { "minimum" : 0.5000, "maximum" : 0.5333 },
            "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
        },
        {
            "index" : 2,
            "hscan" : { "minimum" : 0.5333, "maximum" : 0.5667 },
            "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
        },
        {
            "index" : 3,
            "hscan" : { "minimum" : 0.5667, "maximum" : 0.6000 },
            "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
        },
        {
            "index" : 97,
            "hscan" : { "minimum" : 0.3667, "maximum" : 0.4000 },
            "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
        },
        {
            "index" : 98,
            "hscan" : { "minimum" : 0.4000, "maximum" : 0.4333 },
            "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
        },
        {
            "index" : 99,
            "hscan" : { "minimum" : 0.4333, "maximum" : 0.4667 },
            "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
        }
    ],


    /// The black border configuration, contains the following items: 
    ///  * enable    : true if the detector should be activated
    ///  * threshold : Value below which a pixel is regarded as black (value between 0.0 and 1.0)
    "blackborderdetector" : 
    {
        "enable" : true,
        "threshold" : 0.01
    },


    /// The configuration of the effect engine, contains the following items: 
    ///  * paths        : An array with absolute location(s) of directories with effects 
    ///  * bootsequence : The effect selected as 'boot sequence'
    "effects" : 
    {
        "paths" : 
        [
            "/storage/hyperion/effects"
        ]
    },


//     "bootsequence" : 
//     {
//         "effect" : "Rainbow swirl fast",
//         "duration_ms" : 3000
//     },


    ///  The configuration for the frame-grabber, contains the following items: 
    ///   * width        : The width of the grabbed frames [pixels]
    ///   * height       : The height of the grabbed frames [pixels]
    ///   * frequency_Hz : The frequency of the frame grab [Hz]
    "framegrabber" : 
    {
        "width" : 96,
        "height" : 54,
        "frequency_Hz" : 25.0
    },


    /// The configuration of the XBMC connection used to enable and disable the frame-grabber. Contains the following fields: 
    ///  * xbmcAddress       : The IP address of the XBMC-host
    ///  * xbmcTcpPort       : The TCP-port of the XBMC-server
    ///  * grabVideo         : Flag indicating that the frame-grabber is on(true) during video playback
    ///  * grabPictures      : Flag indicating that the frame-grabber is on(true) during picture show
    ///  * grabAudio         : Flag indicating that the frame-grabber is on(true) during audio playback
    ///  * grabMenu          : Flag indicating that the frame-grabber is on(true) in the XBMC menu
    ///  * grabScreensaver   : Flag indicating that the frame-grabber is on(true) when XBMC is on screensaver
    ///  * enable3DDetection : Flag indicating that the frame-grabber should switch to a 3D compatible modus if a 3D video is playing
    "xbmcVideoChecker" : 
    {
        "xbmcAddress" : "127.0.0.1",
        "xbmcTcpPort" : 80,
        "grabVideo" : true,
        "grabPictures" : true,
        "grabAudio" : true,
        "grabMenu" : true,
        "grabScreensaver" : true,
        "enable3DDetection" : true
    },


    /// The configuration of the Json server which enables the json remote interface
    ///  * port : Port at which the json server is started
    "jsonServer" : 
    {
        "port" : 19444
    },


    /// The configuration of the Proto server which enables the protobuffer remote interface
    ///  * port : Port at which the protobuffer server is started
//     "protoServer" : 
//     {
//         "port" : 19445
//     },


    /// The configuration of the boblight server which enables the boblight remote interface
    ///  * port : Port at which the boblight server is started
//     "boblightServer" : 
//     {
//         "port" : 19333
//     },


    "endOfJson" : "endOfJson"
}