Beiträge von christin

  • codec installieren

    bekomme es einfach nicht hin den Mpg2 codec zu aktivieren
    hier meine config.txt

    ################################################################################
    # This file is part of OpenELEC - http://www.openelec.tv
    # Copyright (C) 2009-2014 Stephan Raue (stephan@openelec.tv)
    # Inspired and partly copied from:
    # http://youresuchageek.blogspot.fr/2012/09/howto-…penelec-on.html
    #
    # OpenELEC is free software: you can redistribute it and/or modify
    # it under the terms of the GNU General Public License as published by
    # the Free Software Foundation, either version 2 of the License, or
    # (at your option) any later version.
    #
    # OpenELEC is distributed in the hope that it will be useful,
    # but WITHOUT ANY WARRANTY; without even the implied warranty of
    # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
    # GNU General Public License for more details.
    #
    # You should have received a copy of the GNU General Public License
    # along with OpenELEC. If not, see <http://www.gnu.org/licenses/>.
    ################################################################################
    Bootloader configuration - config.txt
    ################################################################################

    ################################################################################
    # Memory (System/GPU configuration )
    ################################################################################

    # default GPU memory split (do not change if you do not know what you are doing)
    gpu_mem=128

    # SDRAM size based GPU memory split, uncomment and setup to override 'gpu_mem'
    # gpu_mem_256=128
    # gpu_mem_512=128

    ################################################################################
    # Overclocking settings
    # WARNING: Do not change/enable if you do not know what you are doing!
    # The System may become unstable or you can have data corruption or
    # you can loose your warranty if you set wrong settings
    #
    # please read: http://elinux.org/RPi_config.txt#Overclocking_configuration
    ################################################################################

    # Overclock mode settings.
    #
    # default recommended values are: arm_freq | core_freq | sdram_freq | over_voltage
    # no overclocking : 700 | 250 | 400 | 0
    # mode 'Modest' : 800 | 300 | 400 | 0
    # mode 'Medium' : 900 | 333 | 450 | 2
    # mode 'High' : 950 | 450 | 450 | 6
    # mode 'Turbo' : 1000 | 500 | 500 | 6

    arm_freq=900
    core_freq=333
    sdram_freq=450
    over_voltage=2

    # set to 'force_turbo=1' to disable dynamic overclocking (you can lose your warranty!)
    force_turbo=0

    # If you have any data corruption using Turbo Mode and overclocking
    # try with this setting uncommented
    # If this still fails, try to use Medium mode without "over_voltage=2"
    # If it ultimately keeps failing, forget about this until it gets fixed
    # Use a more conservative mode that will works fine in any cases:
    # initial_turbo=30

    ################################################################################
    # Overscan settings
    ################################################################################

    # Make display smaller to stop text spilling off the screen
    # see also http://www.raspberrypi.org/phpBB3/viewtopic.php?f=67&t=15700
    # overscan_scale=1
    # disable_overscan=1

    # Adapt overscan values to your needs
    # overscan_left=57
    # overscan_right=59
    # overscan_top=20
    # overscan_bottom=20

    ################################################################################
    # various settings see also: http://elinux.org/RPi_config.txt
    ################################################################################

    # Force HDMI even if unplugged or powered off
    # hdmi_force_hotplug=1

    # Doesn't sent initial active source message.
    # Avoids bringing CEC (enabled TV) out of standby and channel switch when
    # rebooting.
    hdmi_ignore_cec_init=1

    ################################################################################
    License keys to enable GPU hardware decoding for various codecs
    to obtain keys visit the shop at http://www.raspberrypi.com
    ################################################################################

    decode_MPG2=0x12345678
    decode_WVC1=0x12345678
    # decode_DTS=0x00000000
    # decode_DDP=0x00000000

    ################################################################################
    # End of default configuration
    # all values below this line were inserted from config.txt.bk (your old config)
    # and can be merged with the above values
    ################################################################################

    was ist bloß falsch
    der WVC1 ist aktiv nur der andere nicht