Hauppauge WinTV-dualHD DVB werden in TVheadend nicht mehr angezeigt

Janos66

Hi,

mit dem Umstieg von Libreelec zu einer normalen Linux Installation, wollte ich meine alte Cine-CTv6.1 wieder in Betrieb nehmen, damit die stabil läuft muss ich den dddvb Treiber selbst bauen.

Mit dem im Kernel mit gelieferten Treiber verschwinden die beiden Tuner nach einiger Zeit und man bekommt nur die Fehlermeldung keine freien Adapter verfügbar.

Ich hatte ja die Hoffnung das sich das inzwischen erledigt hat, aber Digital Devices bekommt es irgendwie nicht gebacken.

Digital Devices scripts for Linux

Die Cine-CTv6 ist jetzt stabil, aber die beiden WinTV-dualHD machen nun Probleme, eigentlich sollte das nichts miteinander zu tun haben, aber mir fällt sonst kein Grund ein warum die beiden Hauppauge Sticks auf einmal nicht mehr funktionieren.

Ich habe es zuerst mit dem im Kernel integriertem Treiber für die CTv6 versucht, damit wurden mir 6 Tuner in TVheadened angezeigt, die beiden der CTv6 und die vier der beiden Hauppauge Sticks.

Einen Zeitlichen Zusammenhang kann ich aber nicht herstellen, zum Zeitpunkt als ich den Treiben für die CTv6 gebaut habe, waren die beiden Hauppauge Sticks nicht im System.

Was benutzt die WinTV-dualHD, was ich durch den selbstgebauten Treiber für die CTv6 verändert habe und wie reparieren ohne das die CTv6 wieder Ärger macht?

Code

em28xx_dvb: disagrees about version of symbol dvb_register_adapter

Code

root@tvserver:~# modinfo em28xx_dvb

filename:       /lib/modules/6.2.0-39-generic/kernel/drivers/media/usb/em28xx/em28xx-dvb.ko

version:        0.2.2
description:    Empia em28xx device driver - digital TV interface
license:        GPL v2
author:         Mauro Carvalho Chehab <mchehab@kernel.org>
srcversion:     9BA8ECCEE7B7286956A8A67
depends:        em28xx,dvb-core
retpoline:      Y
intree:         Y
name:           em28xx_dvb
vermagic:       6.2.0-39-generic SMP preempt mod_unload modversions  
sig_id:         PKCS#7
signer:         Build time autogenerated kernel key

Alles anzeigen

Code

modinfo ddbridge
filename:       /lib/modules/6.2.0-39-generic/extra/ddbridge/ddbridge.ko
version:        0.9.38
license:        GPL v2
author:         Ralph and Marcus Metzler, Metzler Brothers Systementwicklung GbR
description:    Digital Devices PCIe Bridge
srcversion:     FD39D745670653EC4945F55
retpoline:      Y
name:           ddbridge
vermagic:       6.2.0-39-generic SMP preempt mod_unload modversions

Code

8.713108] ddbridge 0000:23:00.0: DVB: registering adapter 0 frontend 0 (STV0367 DVB-C DVB-T)...
[    8.713928] stv0367 found
[    9.253632] ddbridge 0000:23:00.0: DVB: registering adapter 1 frontend 0 (STV0367 DVB-C DVB-T)...
[    9.527093] em28xx 3-3:1.0: EEPROM ID = 26 00 01 00, EEPROM hash = 0xc0e4cc4c
[    9.527103] em28xx 3-3:1.0: EEPROM info:
[    9.527106] em28xx 3-3:1.0:  microcode start address = 0x0004, boot configuration = 0x01
[    9.537448] em28xx 3-3:1.0:  AC97 audio (5 sample rates)
[    9.537454] em28xx 3-3:1.0:  500mA max power
[    9.537457] em28xx 3-3:1.0:  Table at offset 0x27, strings=0x0e6a, 0x1888, 0x087e
[    9.596827] em28xx 3-3:1.0: Identified as Hauppauge WinTV-dualHD DVB (card=99)
[    9.599636] tveeprom: Hauppauge model 204209, rev C3I6, serial# 14316011
[    9.599643] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4)
[    9.599647] tveeprom: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
[    9.599652] tveeprom: audio processor is None (idx 0)
[    9.599654] tveeprom: has no radio, has IR receiver, has no IR transmitter
[    9.599659] em28xx 3-3:1.0: We currently don't support analog TV or stream capture on dual tuners.
[    9.602760] em28xx 3-3:1.0: dvb set to bulk mode.
[    9.661217] em28xx 3-3:1.0: chip ID is em28174
[   10.870515] em28xx 3-3:1.0: EEPROM ID = 26 00 01 00, EEPROM hash = 0xc0e4cc4c
[   10.870527] em28xx 3-3:1.0: EEPROM info:
[   10.870530] em28xx 3-3:1.0:  microcode start address = 0x0004, boot configuration = 0x01
[   10.880724] em28xx 3-3:1.0:  AC97 audio (5 sample rates)
[   10.880730] em28xx 3-3:1.0:  500mA max power
[   10.880732] em28xx 3-3:1.0:  Table at offset 0x27, strings=0x0e6a, 0x1888, 0x087e
[   10.940824] em28xx 3-3:1.0: Identified as Hauppauge WinTV-dualHD DVB (card=99)
[   10.943848] tveeprom: Hauppauge model 204209, rev C3I6, serial# 14316011
[   10.943857] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4)
[   10.943860] tveeprom: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
[   10.943864] tveeprom: audio processor is None (idx 0)
[   10.943866] tveeprom: has no radio, has IR receiver, has no IR transmitter
[   10.943870] em28xx 3-3:1.0: dvb ts2 set to bulk mode.
[   11.143734] em28xx 3-4:1.0: New device HCW dualHD @ 480 Mbps (2040:8265, interface 0, class 0)
[   11.143744] em28xx 3-4:1.0: DVB interface 0 found: bulk
[   11.201449] em28xx 3-4:1.0: chip ID is em28174
[   12.406825] em28xx 3-4:1.0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x3fe5cd4c
[   12.406837] em28xx 3-4:1.0: EEPROM info:
[   12.406839] em28xx 3-4:1.0:  microcode start address = 0x0004, boot configuration = 0x01
[   12.417091] em28xx 3-4:1.0:  AC97 audio (5 sample rates)
[   12.417097] em28xx 3-4:1.0:  500mA max power
[   12.417099] em28xx 3-4:1.0:  Table at offset 0x27, strings=0x0e6a, 0x1888, 0x087e
[   12.476855] em28xx 3-4:1.0: Identified as Hauppauge WinTV-dualHD DVB (card=99)
[   12.479711] tveeprom: Hauppauge model 204209, rev C2I6, serial# 14114300
[   12.479719] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4)
[   12.479722] tveeprom: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
[   12.479726] tveeprom: audio processor is None (idx 0)
[   12.479728] tveeprom: has no radio, has IR receiver, has no IR transmitter
[   12.479734] em28xx 3-4:1.0: We currently don't support analog TV or stream capture on dual tuners.
[   12.482795] em28xx 3-4:1.0: dvb set to bulk mode.
[   12.541180] em28xx 3-4:1.0: chip ID is em28174
[   13.750744] em28xx 3-4:1.0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x3fe5cd4c
[   13.750755] em28xx 3-4:1.0: EEPROM info:
[   13.750758] em28xx 3-4:1.0:  microcode start address = 0x0004, boot configuration = 0x01
[   13.760994] em28xx 3-4:1.0:  AC97 audio (5 sample rates)
[   13.761000] em28xx 3-4:1.0:  500mA max power
[   13.761003] em28xx 3-4:1.0:  Table at offset 0x27, strings=0x0e6a, 0x1888, 0x087e
[   13.820824] em28xx 3-4:1.0: Identified as Hauppauge WinTV-dualHD DVB (card=99)
[   13.824162] tveeprom: Hauppauge model 204209, rev C2I6, serial# 14114300
[   13.824170] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4)
[   13.824174] tveeprom: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
[   13.824178] tveeprom: audio processor is None (idx 0)
[   13.824180] tveeprom: has no radio, has IR receiver, has no IR transmitter
[   13.824185] em28xx 3-4:1.0: dvb ts2 set to bulk mode.
[   14.023729] usbcore: registered new interface driver em28xx
[   14.027989] em28xx_dvb: disagrees about version of symbol dvb_dmxdev_init
[   14.027994] em28xx_dvb: Unknown symbol dvb_dmxdev_init (err -22)
[   14.028025] em28xx_dvb: disagrees about version of symbol dvb_register_adapter
[   14.028026] em28xx_dvb: Unknown symbol dvb_register_adapter (err -22)
[   14.028067] em28xx_dvb: disagrees about version of symbol dvb_net_init
[   14.028068] em28xx_dvb: Unknown symbol dvb_net_init (err -22)
[   14.028078] em28xx_dvb: disagrees about version of symbol dvb_dmxdev_release
[   14.028079] em28xx_dvb: Unknown symbol dvb_dmxdev_release (err -22)
[   14.028086] em28xx_dvb: disagrees about version of symbol dvb_frontend_detach
[   14.028087] em28xx_dvb: Unknown symbol dvb_frontend_detach (err -22)
[   14.028135] em28xx_dvb: Unknown symbol dvb_create_media_graph (err -22)
[   14.028139] em28xx_dvb: disagrees about version of symbol dvb_unregister_adapter
[   14.049854] em28xx_dvb: Unknown symbol dvb_unregister_adapter (err -22)
[   14.078093] em28xx 3-3:1.0: Registering input extension
[   14.108789] Registered IR [definition='3','0'][definition='3','0']keymap[/definition][/definition] rc-hauppauge
[   14.110006] rc rc0: Hauppauge WinTV-dualHD DVB as /devices/pci0000:00/0000:00:01.2/0000:12:00.2/0000:20:00.0/0000:21:00.0/usb3/3-3/3-3:1.0/rc/rc0
[   14.110056] rc rc0: lirc_dev: driver em28xx registered at minor = 0, scancode receiver, no transmitter
[   14.110092] input: Hauppauge WinTV-dualHD DVB as /devices/pci0000:00/0000:00:01.2/0000:12:00.2/0000:20:00.0/0000:21:00.0/usb3/3-3/3-3:1.0/rc/rc0/input10
[   14.110144] em28xx 3-3:1.0: Input extension successfully initialized
[   14.110147] em28xx 3-3:1.0: Remote control support is not available for this card.
[   14.110149] em28xx 3-4:1.0: Registering input extension
[   14.111221] Registered IR [definition='3','0'][definition='3','0']keymap[/definition][/definition] rc-hauppauge
[   14.113626] rc rc1: Hauppauge WinTV-dualHD DVB as /devices/pci0000:00/0000:00:01.2/0000:12:00.2/0000:20:00.0/0000:21:00.0/usb3/3-4/3-4:1.0/rc/rc1
[   14.114244] rc rc1: lirc_dev: driver em28xx registered at minor = 1, scancode receiver, no transmitter
[   14.114359] input: Hauppauge WinTV-dualHD DVB as /devices/pci0000:00/0000:00:01.2/0000:12:00.2/0000:20:00.0/0000:21:00.0/usb3/3-4/3-4:1.0/rc/rc1/input11
[   14.114460] em28xx 3-4:1.0: Input extension successfully initialized
[   14.114462] em28xx 3-4:1.0: Remote control support is not available for this card.
[   14.114464] em28xx: Registered (Em28xx Input Extension) extension
[   20.603571] ddbridge 0000:23:00.0: DVB: adapter 1 frontend 0 frequency 0 out of range (47125000..865000000)
[   20.621943] ddbridge 0000:23:00.0: DVB: adapter 0 frontend 0 frequency 0 out of range (47125000..865000000)

Alles anzeigen

Janos66

ich habe eben das Hauppauge PPA drüber gebügelt, jetzt sind alle 6 Tuner wieder in TVheadend vorhanden.

Das war mit einen Kernel Upgrade von 6.2 auf 6.5 verbunden, die CTv6 läuft jetzt wieder mit dem Inbox Treiber, was nicht lange gut gehen wird..

Jetzt mitmachen!