[Release] PVR EON.tv

    I have a simple question, why in the settings there is an option WebOS since EON has no WebOS app? Also if you choose WebOS then the login doesn't work at all.

    Zitat von CTEoloAH

    I have a simple question, why in the settings there is an option WebOS since EON has no WebOS app? Also if you choose WebOS then the login doesn't work at all.

    It has a WebOs App. Says Google. And correct, if you select it doesn't work. Why is it there? I thought it wouldn't disturb anyone. I can remove if you wan't.

    Zitat von tupqcalypce

    I have a progress. Still error but progress. I have installed Kodi 20.4 and addon pvr.eon 21.78. Now it loads the channels as a list but still not playing them. The account is valid I can use it via Eontv app, with no issues, but with Kodi I can't. The new log file is here. Please advise on any solution.

    >>https://paste.kodi.tv/uvijemifon

    The log looks cleaner now. Probably the illegal addons did corrupt Kodi. Though it is still no debug log - the error is still the same. The platform refuses to play the channel. I wonder what is special with your account? Any idea?

    Zitat von Nirvana777

    It has a WebOs App. Says Google. And correct, if you select it doesn't work. Why is it there? I thought it wouldn't disturb anyone. I can remove if you wan't.

    The log looks cleaner now. Probably the illegal addons did corrupt Kodi. Though it is still no debug log - the error is still the same. The platform refuses to play the channel. I wonder what is special with your account? Any idea?

    Well I got no idea. I ran out of ideas and tries. I have tried all, and it never worked. I have uninstalled Kodi, cleared all corpse data, cache, and empty folders then I have downloaded it from Its official website. I am downloading v7a version to test on my phone (which is v8a) because the TV is Tcl v7a. However. After the clear and fresh install of Kodi 21 Omega from the official website, I have added the latest pvr.21.7.8 armeabiv7a with started debug "log" and all possible "logs" switched on. Now when I add my credentials using - VIVACOM (Web). It just blinks and Its not even in the TV tab. Shows only installed pvr addon and nothing happens. In the "log" file I saw it says failed to get token.. I don't know what to do. I really need get that work but.. I am desperate now. Went through all the versions and addons and nothing works. Here is my "log file" from. the fresh install with all. the debug options on:

    hastebin

    Everything working fine on ShieldTV and PhilipsTV with Telemach SLO.

    Just having issue when waking up shieldTV or on PhilipsTV, most of the time i get error: "one or more items faild to play. Check the log for more information about this message."

    Sometimes resumes playing TV channel normaly.


    using 21-7-8-android-armv7a for Philips Tv and 21-7-8-android-aarch64 for Nvidia shield

    Nirvana777, Thank you for the great plugin!

    I am trying to set it up for Vivacom. However, the channel list is always empty and I could find these messages in the log:

    I am confident that my username and password are correct, as they are valid when logging in via browser.

    The addon is version 21.7.9 for amd64, while Kodi is version 21.0 (latest version on ArchLinux).

    Full log here.

    Any help is appreciated!

    Can you add an option to change the video quality? In the web version of the EON and the mobile app, there is an option to choose: Auto, 1Mbit/s, 2Mbit/s, or 4Mbit/s. I'm not sure but these bitrate options probably are 360p, 720, 1080p.

    Sometimes if the connection isn't good enough the video stream has bad buffering and even freezes. Kodi says it's a 1080p. So, can you add an option to lower the quality?

    Zitat von Bridges55

    Hi,

    is it possible to create this addon for linux aarch64 for Kodi 21 ? Tnx.

    Yes i second that, i tried to build it myself but cant boot in any linux with the boxes that i have.

    PS: I manage to build it on trough docker addon on corelec. I have to use this from second post:

    Code
    mkdir -p xbmc/cmake/addons/addons/pvr.eon/
echo "pvr.eon https://github.com/flubshi/pvr.eon Nexus" > xbmc/cmake/addons/addons/pvr.eon/pvr.eon.txt
echo "all" > xbmc/cmake/addons/addons/pvr.eon/platforms.txt

    Only change nexus to omega


    also this https://github.com/nirvana-7777/pvr.eon/issues/10

    so that could build without errors.


    But the problem is that after install it and enter correct credentials i get this:

    2024-06-28 20:35:04.695 T:1086 error <general>: AddOnLog: pvr.eon: Failed to get OTP
    2024-06-28 20:35:04.696 T:1086 error <general>: AddOnLog: pvr.eon: Open URL failed with 401.
    2024-06-28 20:35:04.696 T:1086 error <general>: AddOnLog: pvr.eon: Failed to get JSON for URL https://api-android-tv.vivacom-af31.cdn.united.cloud/v1/households and body . Status code: 401
    2024-06-28 20:35:04.696 T:1086 error <general>: AddOnLog: pvr.eon: Failed to get households
    2024-06-28 20:35:04.737 T:1086 error <general>: AddOnLog: pvr.eon: Failed to get OTP
    2024-06-28 20:35:04.737 T:1086 error <general>: AddOnLog: pvr.eon: Open URL failed with 401.
    2024-06-28 20:35:04.737 T:1086 error <general>: AddOnLog: pvr.eon: Failed to get JSON for URL https://api-android-tv.vivacom-af31.cdn.united.cloud/v1/sp and body . Status code: 401
    2024-06-28 20:35:04.737 T:1086 error <general>: AddOnLog: pvr.eon: Failed to get service provider

    and it doesn't work.


    I attach the compiled addon if someone need it.

    Hey,
    I am new to this and dont no much abt compling kodi addons or abt kodi addons in general, just wanted to ask did anyone tried to complie pvr eon to tvos. Would be a greta thing bc tvos doesent have EON app at all

    Any chance for Allwiner H6 support? Non of this work at Orange pi 3.

    Thank you in advance.

    EDIT: I managed to install 21.7.6 linux+aarch64 version, it installs, but run tab is grayed out. When I go to settings, live &pvr clients, and mannage channels, I can see all channels and their logos, but I have no option to press play, or run.

    Any help?

    Einmal editiert, zuletzt von c2d (19. Juli 2024 um 11:51)

    Zitat von CTEoloAH

    Can you add an option to change the video quality? In the web version of the EON and the mobile app, there is an option to choose: Auto, 1Mbit/s, 2Mbit/s, or 4Mbit/s. I'm not sure but these bitrate options probably are 360p, 720, 1080p.

    Sometimes if the connection isn't good enough the video stream has bad buffering and even freezes. Kodi says it's a 1080p. So, can you add an option to lower the quality?

    Hey CTEoloAH I am from Bulgaria also and last night I was trying to get the plugin working (with zero luck) I have compiled many possible versions :D even downloaded the pre-compiled zips from Nirvana777 . I could not get it to work and i know for sure that i am typing the passwords properly but i do not see the plugin active in the menus and nothing also in the TV tab where it should display everything. Could you guys please help me understand what is wrong here. I am using https://releases.libreelec.tv/LibreELEC-H3.a…epi-plus.img.gz on my Orange Pi 2 plus (the board where no one from Realtek bothered to add drivers to mainline kernels - RTL8189ETV) I actually made a card with libreelec 11 and upgraded to 12 as the newer version is bugged and not starting. I also tried the addon on libreelec 11 with zero luck there.

    Zitat von obria

    Hey CTEoloAH I am from Bulgaria also and last night I was trying to get the plugin working (with zero luck) I have compiled many possible versions :D even downloaded the pre-compiled zips from Nirvana777 . I could not get it to work and i know for sure that i am typing the passwords properly but i do not see the plugin active in the menus and nothing also in the TV tab where it should display everything. Could you guys please help me understand what is wrong here. I am using https://releases.libreelec.tv/LibreELEC-H3.a…epi-plus.img.gz on my Orange Pi 2 plus (the board where no one from Realtek bothered to add drivers to mainline kernels - RTL8189ETV) I actually made a card with libreelec 11 and upgraded to 12 as the newer version is bugged and not starting. I also tried the addon on libreelec 11 with zero luck there.

    Did you try reinstalling the plugin from zip after entering user/pass in the configuration?

    • Neu

    In my case with Android TV boxes work perfect with 20.xx and 21.xx PVR.EON and Nexus/Omega.

    But with Linux OS(Debian,Raspbian,Armbian,Ubuntu)and RaspberryPi and NanoPi R6S plugin dont start and dont load channels.I build pligin from source.

    Only with PC with Ubuntu 22.04 64Bit I have success.

    And i made a little trick:

    i've got settings.xml file from pvr folder(where are the Login Account settings) from Ubuntu on PC and put this file on RPi4 and NanoPi folder.

    And as result all channels are loading and worked!

    Try this if you have working station and all will be OK.

    • Neu

    Hi guys,

    Thanks a lot for the great addon !

    I tried to compile myself (ubuntu and debian proxmox CT), but I always get the same error at "make".

    Actually I'm looking for a RPI 4 addon. (I downloaded the RPI 2B addon from the forum here which works, but RPI 2B weak cpu allows me only for 720p and 1080p makes more fun).

    ****

    ....

    [ 90%] Building CXX object CMakeFiles/pvr.eon.dir/src/PVREon.cpp.o

    In file included from /home/pvr.eon/src/PVREon.h:14,

    from /home/pvr.eon/src/PVREon.cpp:9:

    /home/pvr.eon/src/http/HttpClient.h:9:7: warning: 'HttpClient' declared with greater visibility than the type of its field 'HttpClient::m_settings' [-Wattributes]

    9 | class HttpClient

    | ^~~~~~~~~~

    /home/pvr.eon/src/PVREon.h:145:13: error: 'PVR_ERROR CPVREon::GetChannelStreamProperties(const kodi::addon::PVRChannel&, std::vector<kodi::addon::PVRStreamProperty>&)' marked 'override', but does not override

    145 | PVR_ERROR GetChannelStreamProperties(

    | ^~~~~~~~~~~~~~~~~~~~~~~~~~

    make[5]: *** [CMakeFiles/pvr.eon.dir/build.make:188: CMakeFiles/pvr.eon.dir/src/PVREon.cpp.o] Error 1

    make[4]: *** [CMakeFiles/Makefile2:110: CMakeFiles/pvr.eon.dir/all] Error 2

    make[3]: *** [Makefile:156: all] Error 2

    make[2]: *** [CMakeFiles/pvr.eon.dir/build.make:88: pvr.eon-prefix/src/pvr.eon-stamp/pvr.eon-build] Error 2

    make[1]: *** [CMakeFiles/Makefile2:132: CMakeFiles/pvr.eon.dir/all] Error 2

    make: *** [Makefile:91: all] Error 2

    ****

    I needed first to install the following: apt install git build-essential cmake

    before I proceeded with the recipe.

    What am I doing wrong ?

    Thanks and Cheers in advance !

    • Neu

    Every compilation from source must match current version of addon and Kodi.

    For example Kodi 21 - pvr addon 21.xx

    Within compilaton must specify branch Omega or branch Nexus.

    There is a little trick with building.

    1. git clone --branch Nexus https://github.com/xbmc/xbmc.git
    2. git clone --branch Nexus https://github.com/nirvana-7777/pvr.eon.git

    and so on...

    • Neu
    Zitat von uplevel

    Every compilation from source must match current version of addon and Kodi.

    For example Kodi 21 - pvr addon 21.xx

    Within compilaton must specify branch Omega or branch Nexus.

    There is a little trick with building.

    1. git clone --branch Nexus https://github.com/xbmc/xbmc.git
    2. git clone --branch Nexus https://github.com/nirvana-7777/pvr.eon.git

    and so on...

    That worked with Omega, thanks a lot !! However, as I used "all" for platforms.txt (and compiled in a LXC using x86_64) and tried to install the add-on on the Raspberry Pi 4, it didn't work. How do I choose the right platform ? Do I need to compile it on the RPi4 directly to make it work ?

    Thanks and Cheers in advance !

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!

Benutzerkonto erstellen Anmelden