Ubuntu 18.04 - Finde im Netzwerk den Ubuntu PC nicht?

taker-`

hi,

hab noch mal eine frage zu meinem ubuntu pc. ich habe hier nachgelesen, aber irgendwie komme ich nicht weiter und hoffe auf rat.
also, ich habe ubuntu auf meinem minipc. dort habe ich samba installiert und auch freigaben eingerichtet.
außerdem hängen da diverse hdds dran, die ebenfalls gemounted (fstab) und eingebunden und auch freigegeben sind.

wenn ich in windows 10 nun ein netzlaufwerk einrichte geht das. aber wenn ich im netzwerk schaue, sehe ich den ubuntu pc nicht.

gibt es da irgendwas besonderes, was ich einstellen muss, damit das funktioniert?
habe mal meine smb.conf angehängt. vllt. hilft es ja

mfg

TehTux

Ist workgroup korrekt gesetzt? Da muss das stehen was du bei Windows in Arbeitsgruppe eingetragen hast (danach samba neu starten).

DaVu

Zitat von taker-`

wenn ich in windows 10 nun ein netzlaufwerk einrichte geht das. aber wenn ich im netzwerk schaue, sehe ich den ubuntu pc nicht.

Dein Samba Server ist in Ubuntu sehr wahrscheinlich auf SMB2/3 konfiguriert und SMB1 ist nicht eingestellt.

Das "sehen" der Rechner im Netzwerk ist ein SMB1 Feature gewesen. SMB1 ist aber eine Sicherheitslücke in sich und sollte nicht mehr aktiviert werden. Daher müssen SMB-shares nun auch mit einem Passwort vergeben werden.

Lange Rede kurzer Sinn. Es liegt am Samba Server und sollte auch so bleiben.

SkyBird1980

@DaVu, dazu nochmal ne Frage: Wenn das Finden von Rechnern ein SMB1 Feature ist, warum kann ich dann andere Windows Rechner im Netzwerk sehen auch wenn es bei mir im Netzwerk nur SMB 2/3 gibt?

DaVu

Keine Ahnung. Ich bin kein Windows-User

Mag auch sein, dass die Rechner weiter gelistet sind aber die Shares auf den Rechner nicht?!

Wenn das so ist, dann käme wieder das mit der Arbeitsgruppe oben in Frage. Dann würde man ggf. die Rechner sehen, aber nicht die Shares

SkyBird1980

Hat mich nur interessiert wie Microsoft das macht

taker-`

Hmmm, ich habe in windows das v1 Protokoll aktiv. Ich weis, nicht so gut, aber ich brauche es.

Wo kann ich am samba Server sehen, welche protokolle 'aktiv' sind?

//edit: Arbeitsgruppe ist überall 'Workgroup'

monarc99

Hast du es denn mal mit der IP Adresse probiert?
Ob er drauf kommt, oder ob da irgendwo noch ne verborgene Firewall auf deinem Ubuntu läuft.

smb://ip-adresse/

taker-`

ja, wie gesagt, habe die ordner und festplatten in windows 10 als netzlaufwerk eingebunden. verbindung geht einwandfrei. ich seh eben nur den ubuntu pc in der netzwerkumgebung nicht.

monarc99

Im Samba Wiki steht:

Zitat

Samba as an standalone server
Why does Windows Network Neighborhood not show Samba server(s)?

If you are using SMB2 or SMB3, network browsing uses WSD/LLMNR, which is not yet supported by Samba [1]. SMB1 is disabled by default on the latest Windows versions for security reasons. It is still possible to access the Samba resources directly via \\name or \\ip.address.
If SMB1 is enabled on Windows, check that NetBIOS over TCP/IP is also enabled, and that nmbd is started on the server.

DeBaschdi

@taker-`

ich nutze in meinem lokalen netz diese smb config für den server :

Code

[global]
client max protocol = NT1
#server min protocol = SMB2_10
#client max protocol = SMB3
#client min protocol = SMB2_10
netbios name = heimserver
workgroup = WORKGROUP
browse list = yes
name resolve order = host bcast wins
case sensitive = no
security = user
map to guest = bad user
#guest account = guest
invalid users = root
domain master = yes
preferred master = yes
local master = yes
wins support = yes
wins proxy = yes
os level = 51
dns proxy = no
auto services = global
[definition='1','0']log[/definition] file = /var/[definition='1','0']log[/definition]/samba/[definition='1','0']log[/definition].%m
max [definition='1','0']log[/definition] size = 1000
panic action = /usr/share/samba/panic-action %d
server role = standalone server
passdb backend = tdbsam
obey pam restrictions = no
guest ok = yes
public = yes
browseable = yes
lm announce = yes
auto services = yes


[printers]
        comment = All Printers
        path = /var/tmp
        printable = Yes
        create mask = 0600
        browseable = No


[print$]
        comment = Printer Drivers
        path = /var/lib/samba/drivers
        write list = @ntadmin root
        force group = ntadmin
        create mask = 0664
        directory mask = 0775


[share]
        comment = mein share
        force group = ich
        force user = ich
        inherit acls = Yes
        path = /mein/share
        read only = No
        create mode = 0700
        force create mode = 0700
        create mask = 0700
        directory mask = 0700

Alles anzeigen

damit fährst du ganz gut
workgroup--->netbiosname---->share

musst natürlich noch den smbuser "ich" hinzufügen, bzw du.

sudo smbpasswd -a ich-bzw-du

taker-`

klasse, danke @DeBaschdi nun funktioniert es

habe mal paar files testweise kopiert. läuft. auch kodi kann nun drauf zugreifen.

habe nun aber auch viel über nfs-freigaben gelesen. und das was ich so gelesen habe...naja, soll wohl besser in so ziemlich jeder hinsicht sein, als smb.

nutzt das jemand von euch? kann man auch smb UND nfs nutzen? windows 10 (pro) kann doch mittlerweiler auch nfs?

wäre das evntl doch sinnvoller wie smb freigaben?

DaVu

Zitat von taker-`

nutzt das jemand von euch? kann man auch smb UND nfs nutzen?

Ja, und ja

Mein NAS verteilt NFS und SMB Freigaben im Netzwerk. Wobei ich zugeben muss, dass ich für Kodi ausschließlich NFS benutze. Linux und NFS passen einfach gut zusammen. Heißt aber nicht, dass SMB nicht auch geht. Wenn du mit SMB klar kommst und alles so läuft, wie gewünscht, dann ist das ok.

NFSv3 funktioniert halt komplett ohne passwort. Dort kannst du per Konfig aber einstellen welche IP oder welcher User sich verbinden soll/kann/darf. Wenn du Passwortgeschütztes NFS haben möchtest brauchst du mindestens NFSv4 und Kerberos. Habe ich persönlich noch nie aufgesetzt und kann daher nichts darüber sagen, wie einfach/schwierig das ist. NFSv4 funktioniert aber auch ohne Passwortschutz. UnRaid (mein NAS in dem Fall) bietet zum Beispiel nur NFSv3. Ubuntu sollte dir per Kernel konfig schon NFSv4 bieten. Du kannst aber den NFSv4 Share auch als NFSv3 mounten falls das Gast-OS nur NFSv3 unterstützt.

Kodi bringt seinen eigenen NFS Client mit sich (libnfs). Von daher recht einfach mal das eine oder das andere zu probieren und sehen was einem besser gefällt.

DeBaschdi

@taker-` in deinem privaten netz kannst du bedenkenlos smbv1 aktiviert lassen. Da passiert überhauptnix.
Unsichrer ist da nfs (praktisch keinen schutz sofern erstmal im selben subnetz)
Smb hat nur mehr overhead, da ist nfs schneller.

taker-`

moin,

hmmm, also irgendwie ist nun die smb freigabe wieder komplett weg. komme nicht mehr auf meine usb-hdd´s und sehen tu ich den minipc nun auch nicht mehr im netzwerk.
keine ahnung wieso. nutze ja @DeBaschdi ´s samba.conf

habe nun mal nfs installiert und getestet. bin wie hier vorgegangen, für nfsv4.

ab hier

Code

sudo mount -t nfs -o nfsvers=4 <nfs-server>:/ /mnt/nfsv4-test

komme ich nicht mehr weiter. habe "<nfs-server>" mit "<ip-vom-minipc>" ersetzt und dann kommt , dass die datei oder das verzeichnis nicht gefunden wird. war mit winscp mal drauf...ordner ist aber da

also im großen und ganzen geht im moment weder samba noch nfs :o

achja, ich habe auch noch, bevor ich die samba.conf von baschdi nahm mit dem befehl adduser den user ich erstellt und ihm auch ein pw vergeben. (war doch richtig so, oder?) oder müsste ich in der conf die "ich"´s durch MEINEN username ersetzen? also "sascha"? (zeile 52 und 53) außerdem muss ich noch in zeile 55 den pfad abändern, oder?

//edit2:

Code

sudo /etc/init.d/smbd status -l

spuckt mir das aus

Code

sascha@sascha-htpc-ubuntu:~$ sudo /etc/init.d/smbd status -l
[sudo] Passwort für sascha:
● smbd.service - Samba SMB Daemon
   Loaded: loaded (/lib/systemd/system/smbd.service; enabled; vendor preset: ena                                                          bled)
   Active: failed (Result: exit-code) since Mon 2019-03-25 22:48:49 CET; 4h 59mi                                                          n ago
     Docs: man:smbd(8)
           man:samba(7)
           man:smb.conf(5)
 Main PID: 27693 (code=exited, status=1/FAILURE)


Mär 25 22:48:49 sascha-htpc-ubuntu systemd[1]: Starting Samba SMB Daemon...
Mär 25 22:48:49 sascha-htpc-ubuntu systemd[1]: smbd.service: Main process e…URE
Mär 25 22:48:49 sascha-htpc-ubuntu systemd[1]: smbd.service: Failed with re…e'.
Mär 25 22:48:49 sascha-htpc-ubuntu systemd[1]: Failed to start Samba SMB Da…on.
Hint: Some lines were ellipsized, use -l to show in full.
sascha@sascha-htpc-ubuntu:~$ -l
-l: Befehl nicht gefunden.
sascha@sascha-htpc-ubuntu:~$ sudo /etc/init.d/smbd status -lsascha@sascha-htpc-ubuntu:~$ sudo /etc/init.d/smbd status -l
● smbd.service - Samba SMB Daemon
   Loaded: loaded (/lib/systemd/system/smbd.service; enabled; vendor preset: enabled)
   Active: failed (Result: exit-code) since Mon 2019-03-25 22:48:49 CET; 5h 1min ago
     Docs: man:smbd(8)
           man:samba(7)
           man:smb.conf(5)
 Main PID: 27693 (code=exited, status=1/FAILURE)


Mär 25 22:48:49 sascha-htpc-ubuntu systemd[1]: Starting Samba SMB Daemon...
Mär 25 22:48:49 sascha-htpc-ubuntu systemd[1]: smbd.service: Main process exited, code=exited, status=1/FAILURE
Mär 25 22:48:49 sascha-htpc-ubuntu systemd[1]: smbd.service: Failed with result 'exit-code'.
Mär 25 22:48:49 sascha-htpc-ubuntu systemd[1]: Failed to start Samba SMB Daemon.
sascha@sascha-htpc-ubuntu:~$ [sudo] Passwort für sascha:
[sudo]: Befehl nicht gefunden.
sascha@sascha-htpc-ubuntu:~$ ● smbd.service - Samba SMB Daemon
●: Befehl nicht gefunden.
sascha@sascha-htpc-ubuntu:~$    Loaded: loaded (/lib/systemd/system/smbd.service; enabled; vendor preset: ena                                                          bled)
-bash: Syntaxfehler beim unerwarteten Wort »(«
sascha@sascha-htpc-ubuntu:~$    Active: failed (Result: exit-code) since Mon 2019-03-25 22:48:49 CET; 4h 59mi                                                          n ago
-bash: Syntaxfehler beim unerwarteten Wort »(«
sascha@sascha-htpc-ubuntu:~$      Docs: man:smbd(8)
-bash: Syntaxfehler beim unerwarteten Wort »(«
sascha@sascha-htpc-ubuntu:~$            man:samba(7)
-bash: Syntaxfehler beim unerwarteten Wort »7«
sascha@sascha-htpc-ubuntu:~$            man:smb.conf(5)
-bash: Syntaxfehler beim unerwarteten Wort »5«
sascha@sascha-htpc-ubuntu:~$  Main PID: 27693 (code=exited, status=1/FAILURE)
-bash: Syntaxfehler beim unerwarteten Wort »(«
sascha@sascha-htpc-ubuntu:~$
sascha@sascha-htpc-ubuntu:~$ Mär 25 22:48:49 sascha-htpc-ubuntu systemd[1]: Starting Samba SMB Daemon...
Mär: Befehl nicht gefunden.
sascha@sascha-htpc-ubuntu:~$ Mär 25 22:48:49 sascha-htpc-ubuntu systemd[1]: smbd.service: Main process e…URE
Mär: Befehl nicht gefunden.
sascha@sascha-htpc-ubuntu:~$ Mär 25 22:48:49 sascha-htpc-ubuntu systemd[1]: smbd.service: Failed with re…e'.
> Mär 25 22:48:49 sascha-htpc-ubuntu systemd[1]: Failed to start Samba SMB Da…on.
> Hint: Some lines were ellipsized, use -l to show in full.
> sudo /etc/init.d/smbd status -lsascha@sascha-htpc-ubuntu:~$ sudo /etc/init.d/smbd status -l
>

Alles anzeigen

DeBaschdi

hast du zwischenzeitlich ufw installiert ?
sudo service ufw stop
sudo systemctl disable ufw.service

Neustart und freuen

taker-`

wenn ich wüsste was ufw ist?

habe nun

Code

sudo apt-get --purge remove samba-common samba

gemacht und danach nochmal installiert. nun läuft der smb server wieder. aber er wird nun immer noch nicht erkannt. habe nun auch an den einstellungen gar nix gemacht. ist nun alles standard.

DeBaschdi

Uufw ist die UncomplucatedFireWall
Was sagt
sudo service nmbd status
Und dmesg

Zu dem rest, du musst user sascha als smbuser hinzufügen
sudo smbpasswd -a sascha
Und un der smb.conf ich durch sascha ersetzen.
Natürlich musst du auch den pfad zum share anpassen.

Ich tippe auf Firewall Problem.
Check mal ufw und disable es, wie beschrieben.

taker-`

Sorry, hatte viel um die Ohren... Ich mach das heute mittag. Nmbd ist aktiviert. Das weiß ich schonmal.

sudo smbpasswd -a sascha <-- mit dem Befehl adde ich den User Sascha schon? Dachte damit leg ich nur das pw fest und das geht nicht, wenn der User nicht da ist? Oder muss ich sascha dann noch zu ner Gruppe hinzufügen?

hier die dmesg:

Code

[    0.000000] microcode: microcode updated early to revision 0x20, date = 2018-                                              04-10
[    0.000000] Linux version 4.18.0-16-generic (buildd@lcy01-amd64-006) (gcc ver                                              sion 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #17~18.04.1-Ubuntu SMP Tue Feb 12 13:35:51                                               UTC 2019 (Ubuntu 4.18.0-16.17~18.04.1-generic 4.18.20)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-16-generic root=/de                                              v/mapper/ubuntu--vg-root ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point regi                                              sters'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes,                                               using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000cd92efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cd92f000-0x00000000cddb9fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cddba000-0x00000000cde44fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cde45000-0x00000000cdee1fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cdee2000-0x00000000ce56ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ce570000-0x00000000ce570fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ce571000-0x00000000ce5b3fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000ce5b4000-0x00000000ced5efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ced5f000-0x00000000ceff1fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ceff2000-0x00000000ceffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cf800000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ZOTAC ZBOXNANO-ID62/ZBOXNANO-ID62, BIOS 4.6.5 11/20/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x11f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 100000000 mask FE0000000 write-back
[    0.000000]   2 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   3 base 0D0000000 mask FF0000000 uncachable
[    0.000000]   4 base 0CF800000 mask FFF800000 uncachable
[    0.000000]   5 base 11F800000 mask FFF800000 uncachable
[    0.000000]   6 base 11F600000 mask FFFE00000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
[    0.000000] total RAM covered: 3822M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K  chunk_size: 16M         num_reg: 7      lose cov                                              er RAM: 0G
[    0.000000] e820: update [mem 0xcf800000-0xffffffff] usable ==> reserved
[    0.000000] last_pfn = 0xcf000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd760-0x000fd76f] mapped at [(___                                              _ptrval____)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [(____ptrval____)] 97000 size 24576
[    0.000000] BRK [0x9b563000, 0x9b563fff] PGTABLE
[    0.000000] BRK [0x9b564000, 0x9b564fff] PGTABLE
[    0.000000] BRK [0x9b565000, 0x9b565fff] PGTABLE
[    0.000000] BRK [0x9b566000, 0x9b566fff] PGTABLE
[    0.000000] BRK [0x9b567000, 0x9b567fff] PGTABLE
[    0.000000] BRK [0x9b568000, 0x9b568fff] PGTABLE
[    0.000000] BRK [0x9b569000, 0x9b569fff] PGTABLE
[    0.000000] BRK [0x9b56a000, 0x9b56afff] PGTABLE
[    0.000000] BRK [0x9b56b000, 0x9b56bfff] PGTABLE
[    0.000000] BRK [0x9b56c000, 0x9b56cfff] PGTABLE
[    0.000000] BRK [0x9b56d000, 0x9b56dfff] PGTABLE
[    0.000000] BRK [0x9b56e000, 0x9b56efff] PGTABLE
[    0.000000] RAMDISK: [mem 0x331b7000-0x358d2fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000CDED4078 00006C (v01 ALASKA A M I    0107200                                              9 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000CDEDD518 00010C (v05 ALASKA A M I    0107200                                              9 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000CDED4178 0093A0 (v02 ALASKA A M I    0000002                                              4 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000CDEE0080 000040
[    0.000000] ACPI: APIC 0x00000000CDEDD628 000062 (v03 ALASKA A M I    0107200                                              9 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000CDEDD690 000044 (v01 ALASKA A M I    0107200                                              9 AMI  00010013)
[    0.000000] ACPI: ASF! 0x00000000CDEDD6D8 0000A5 (v32 INTEL   HCG     0000000                                              1 TFSM 000F4240)
[    0.000000] ACPI: MCFG 0x00000000CDEDD780 00003C (v01 ALASKA A M I    0107200                                              9 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000CDEDD7C0 000038 (v01 ALASKA A M I    0107200                                              9 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000CDEDD7F8 000315 (v01 SataRe SataTabl 0000100                                              0 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000CDEDDB10 00079A (v01 PmRef  Cpu0Ist  0000300                                              0 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000CDEDE2B0 000AA2 (v01 PmRef  CpuPm    0000300                                              0 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011f5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x11f5d2000-0x11f5fcfff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000011f5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x0000000040003fff]
[    0.000000]   node   0: [mem 0x0000000040005000-0x00000000cd92efff]
[    0.000000]   node   0: [mem 0x00000000cddba000-0x00000000cde44fff]
[    0.000000]   node   0: [mem 0x00000000ce570000-0x00000000ce570fff]
[    0.000000]   node   0: [mem 0x00000000ce5b4000-0x00000000ced5efff]
[    0.000000]   node   0: [mem 0x00000000ceff2000-0x00000000ceffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000011f5fffff]
[    0.000000] Reserved but unavailable: 8433 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011f5fffff]
[    0.000000] On node 0 totalpages: 972047
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13118 pages used for memmap
[    0.000000]   DMA32 zone: 839539 pages, LIFO batch:31
[    0.000000]   Normal zone: 2008 pages used for memmap
[    0.000000]   Normal zone: 128512 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at [mem 0xcfa00000-0xdf9fffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcd92f000-0xcddb9fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcde45000-0xcdee1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcdee2000-0xce56ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xce571000-0xce5b3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xced5f000-0xceff1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf000000-0xcf7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf800000-0xdf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffff                                              ffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x99/0x55a with                                               crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node                                              _ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28                                              672 u1048576
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 956836
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-16-generic r                                              oot=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=1
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3691964K/3888188K available (12300K kernel code, 2633K rw                                              data, 4360K rodata, 2464K init, 2340K bss, 196224K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 40832 entries in 160 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[    0.000000]  Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#1
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180531
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_i                                              dle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 1496.541 MHz processor
[    0.024000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x15                                              925f27cf4, max_idle_ns: 440795267399 ns
[    0.024000] Calibrating delay loop (skipped), value calculated using timer fr                                              equency.. 2993.08 BogoMIPS (lpj=5986164)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.024000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes                                              )
[    0.024000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.024000] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.024000] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.024000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.024000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.024000] mce: CPU supports 7 MCE banks
[    0.024000] CPU0: Thermal monitoring enabled (TM1)
[    0.024000] process: using mwait in idle threads
[    0.024000] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.024000] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.024000] Spectre V2 : Mitigation: Full generic retpoline
[    0.024000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on c                                              ontext switch
[    0.024000] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Pred                                              iction Barrier
[    0.024000] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.024000] Speculative Store Bypass: Mitigation: Speculative Store Bypass di                                              sabled via prctl and seccomp
[    0.024000] Freeing SMP alternatives memory: 36K
[    0.032099] TSC deadline timer enabled
[    0.032103] smpboot: CPU0: Intel(R) Celeron(R) CPU 1007U @ 1.50GHz (family: 0                                              x6, model: 0x3a, stepping: 0x9)
[    0.032260] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, fu                                              ll-width counters, Intel PMU driver.
[    0.032294] ... version:                3
[    0.032295] ... bit width:              48
[    0.032296] ... generic registers:      8
[    0.032297] ... value mask:             0000ffffffffffff
[    0.032298] ... max period:             00007fffffffffff
[    0.032299] ... fixed-purpose events:   3
[    0.032300] ... event mask:             00000007000000ff
[    0.032356] Hierarchical SRCU implementation.
[    0.033654] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.033679] smp: Bringing up secondary CPUs ...
[    0.033817] x86: Booting SMP configuration:
[    0.033819] .... node  #0, CPUs:      #1
[    0.036038] smp: Brought up 1 node, 2 CPUs
[    0.036038] smpboot: Max logical packages: 1
[    0.036038] smpboot: Total of 2 processors activated (5986.16 BogoMIPS)
[    0.037836] devtmpfs: initialized
[    0.037836] x86/mm: Memory block size: 128MB
[    0.037836] PM: Registering ACPI NVS region [mem 0xcde45000-0xcdee1fff] (6430                                              72 bytes)
[    0.037836] PM: Registering ACPI NVS region [mem 0xce571000-0xce5b3fff] (2744                                              32 bytes)
[    0.037836] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma                                              x_idle_ns: 7645041785100000 ns
[    0.037836] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.037836] pinctrl core: initialized pinctrl subsystem
[    0.037836] RTC time:  7:33:33, date: 03/28/19
[    0.037836] NET: Registered protocol family 16
[    0.037836] audit: initializing netlink subsys (disabled)
[    0.037836] audit: type=2000 audit(1553758413.036:1): state=initialized audit                                              _enabled=0 res=1
[    0.037836] cpuidle: using governor ladder
[    0.037836] cpuidle: using governor menu
[    0.037836] ACPI FADT declares the system doesn't support PCIe ASPM, so disab                                              le it
[    0.037836] ACPI: bus type PCI registered
[    0.037836] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.037836] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfb                                              ffffff] (base 0xf8000000)
[    0.037836] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.037836] PCI: Using configuration type 1 for base access
[    0.040034] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.041892] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.041892] ACPI: Added _OSI(Module Device)
[    0.041892] ACPI: Added _OSI(Processor Device)
[    0.041892] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.041892] ACPI: Added _OSI(Processor Aggregator Device)
[    0.041892] ACPI: Added _OSI(Linux-Dell-Video)
[    0.041892] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.056800] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.062357] ACPI: Dynamic OEM Table Load:
[    0.062369] ACPI: SSDT 0xFFFF96155A0B8000 00083B (v01 PmRef  Cpu0Cst  0000300                                              1 INTL 20051117)
[    0.063418] ACPI: Dynamic OEM Table Load:
[    0.063425] ACPI: SSDT 0xFFFF96155A148000 000303 (v01 PmRef  ApIst    0000300                                              0 INTL 20051117)
[    0.064077] ACPI: Dynamic OEM Table Load:
[    0.064083] ACPI: SSDT 0xFFFF96155A230000 000119 (v01 PmRef  ApCst    0000300                                              0 INTL 20051117)
[    0.065221] ACPI: Interpreter enabled
[    0.065257] ACPI: (supports S0 S1 S3 S4 S5)
[    0.065259] ACPI: Using IOAPIC for interrupt routing
[    0.065308] PCI: Using host bridge windows from ACPI; if necessary, use "pci=                                              nocrs" and report a bug
[    0.065798] ACPI: Enabled 16 GPEs in block 00 to 3F
[    0.082927] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.082936] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM S                                              egments MSI]
[    0.083557] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHP                                              CHotplug PME]
[    0.083956] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[    0.083958] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS c                                              onfiguration
[    0.085122] PCI host bridge to bus 0000:00
[    0.085126] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.085128] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.085131] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff win                                              dow]
[    0.085133] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff win                                              dow]
[    0.085135] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff win                                              dow]
[    0.085138] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff win                                              dow]
[    0.085140] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff win                                              dow]
[    0.085142] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff win                                              dow]
[    0.085144] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff win                                              dow]
[    0.085147] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff win                                              dow]
[    0.085149] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.085162] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.085351] pci 0000:00:02.0: [8086:0156] type 00 class 0x030000
[    0.085367] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.085376] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref                                              ]
[    0.085382] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.085642] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.085684] pci 0000:00:16.0: reg 0x10: [mem 0xf7e0a000-0xf7e0a00f 64bit]
[    0.085806] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.085989] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.086025] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e08000-0xf7e083ff]
[    0.086160] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.086333] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.086374] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e00000-0xf7e03fff 64bit]
[    0.086505] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.086678] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.086821] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.087003] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.087142] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.087322] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[    0.087459] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.087637] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
[    0.087776] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.087968] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.088005] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e07000-0xf7e073ff]
[    0.088139] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.088310] pci 0000:00:1f.0: [8086:1e5f] type 00 class 0x060100
[    0.088621] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.088658] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.088673] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.088688] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.088703] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.088718] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.088733] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e06000-0xf7e067ff]
[    0.088811] pci 0000:00:1f.2: PME# supported from D3hot
[    0.088976] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.089010] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e05000-0xf7e050ff 64bit]
[    0.089048] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.089314] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.089441] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.089485] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.089530] pci 0000:02:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref                                              ]
[    0.089559] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref                                              ]
[    0.089717] pci 0000:02:00.0: supports D1 D2
[    0.089719] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.089887] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.089893] pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
[    0.089906] pci 0000:00:1c.1:   bridge window [mem 0xf0000000-0xf00fffff 64bi                                              t pref]
[    0.090032] pci 0000:03:00.0: [1912:0015] type 00 class 0x0c0330
[    0.090113] pci 0000:03:00.0: reg 0x10: [mem 0xf7d00000-0xf7d01fff 64bit]
[    0.090426] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.090625] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.090634] pci 0000:00:1c.2:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.090766] pci 0000:04:00.0: [8086:0887] type 00 class 0x028000
[    0.090848] pci 0000:04:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit]
[    0.091152] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.091326] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.091335] pci 0000:00:1c.3:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.092591] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.092725] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.092856] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.092986] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.093115] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0,                                               disabled.
[    0.093245] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0,                                               disabled.
[    0.093377] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.093508] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.094027] SCSI subsystem initialized
[    0.094077] libata version 3.00 loaded.
[    0.094077] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.094077] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=i                                              o+mem,locks=none
[    0.094077] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.094077] vgaarb: loaded
[    0.094077] ACPI: bus type USB registered
[    0.094077] usbcore: registered new interface driver usbfs
[    0.094077] usbcore: registered new interface driver hub
[    0.094077] usbcore: registered new device driver usb
[    0.094077] pps_core: LinuxPPS API ver. 1 registered
[    0.094077] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome                                              tti <giometti@linux.it>
[    0.094077] PTP clock support registered
[    0.094077] EDAC MC: Ver: 3.0.0
[    0.094077] PCI: Using ACPI for IRQ routing
[    0.096489] PCI: pci_cache_line_size set to 64 bytes
[    0.096571] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.096573] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.096574] e820: reserve RAM buffer [mem 0xcd92f000-0xcfffffff]
[    0.096577] e820: reserve RAM buffer [mem 0xcde45000-0xcfffffff]
[    0.096579] e820: reserve RAM buffer [mem 0xce571000-0xcfffffff]
[    0.096581] e820: reserve RAM buffer [mem 0xced5f000-0xcfffffff]
[    0.096583] e820: reserve RAM buffer [mem 0xcf000000-0xcfffffff]
[    0.096585] e820: reserve RAM buffer [mem 0x11f600000-0x11fffffff]
[    0.096725] NetLabel: Initializing
[    0.096726] NetLabel:  domain hash size = 128

Alles anzeigen

taker-`

sorry muss es leider auf 3 mal machen da es insgesamt knapp 90k Zeichen sind.

Code

[    0.096727] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.096750] NetLabel:  unlabeled traffic allowed by default
[    0.096777] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.096777] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.098603] clocksource: Switched to clocksource tsc-early
[    0.114643] VFS: Disk quotas dquot_6.6.0
[    0.114666] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.114829] AppArmor: AppArmor Filesystem Enabled
[    0.114866] pnp: PnP ACPI init
[    0.115058] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.115067] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.115224] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.115227] system 00:01: [io  0x1000-0x100f] has been reserved
[    0.115230] system 00:01: [io  0xffff] has been reserved
[    0.115232] system 00:01: [io  0xffff] has been reserved
[    0.115235] system 00:01: [io  0x0400-0x0453] has been reserved
[    0.115237] system 00:01: [io  0x0458-0x047f] has been reserved
[    0.115240] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.115243] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.115250] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.115290] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.115383] system 00:03: [io  0x0454-0x0457] has been reserved
[    0.115390] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (act                                              ive)
[    0.115706] system 00:04: [io  0x0a00-0x0a1f] has been reserved
[    0.115709] system 00:04: [io  0x0a30-0x0a3f] has been reserved
[    0.115712] system 00:04: [io  0x0a20-0x0a2f] has been reserved
[    0.115718] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.116244] pnp 00:05: [dma 0 disabled]
[    0.116328] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.116486] pnp 00:06: Plug and Play ACPI device, IDs NTN0530 (active)
[    0.116585] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.116592] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.117057] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.117060] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.117062] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.117065] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.117068] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.117071] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.117074] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.117076] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.117079] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[    0.117083] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.117085] system 00:08: [mem 0xdfa00000-0xdfa00fff] has been reserved
[    0.117092] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.117454] system 00:09: [mem 0x20000000-0x201fffff] has been reserved
[    0.117456] system 00:09: [mem 0x40004000-0x40004fff] has been reserved
[    0.117463] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.117480] pnp: PnP ACPI: found 10 devices
[    0.124005] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_id                                              le_ns: 2085701024 ns
[    0.124067] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.124088] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.124092] pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
[    0.124105] pci 0000:00:1c.1:   bridge window [mem 0xf0000000-0xf00fffff 64bi                                              t pref]
[    0.124115] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.124123] pci 0000:00:1c.2:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.124136] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.124144] pci 0000:00:1c.3:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.124159] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.124162] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.124164] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.124167] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.124169] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.124171] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.124174] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.124176] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.124178] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.124181] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff window]
[    0.124183] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.124186] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref                                              ]
[    0.124188] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
[    0.124191] pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.124379] NET: Registered protocol family 2
[    0.124634] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 3276                                              8 bytes)
[    0.124659] TCP established hash table entries: 32768 (order: 6, 262144 bytes                                              )
[    0.124754] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.124861] TCP: Hash tables configured (established 32768 bind 32768)
[    0.124900] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.124921] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.124980] NET: Registered protocol family 1
[    0.124987] NET: Registered protocol family 44
[    0.125002] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c00                                              00-0x000dffff]
[    0.125690] PCI: CLS mismatch (64 != 32), using 64 bytes
[    0.126050] Unpacking initramfs...
[    1.061831] Freeing initrd memory: 40048K
[    1.061947] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.061951] software IO TLB [mem 0xc992f000-0xcd92f000] (64MB) mapped at [(__                                              __ptrval____)-(____ptrval____)]
[    1.062255] Scanning for low memory corruption every 60 seconds
[    1.063218] Initialise system trusted keyrings
[    1.063229] Key type blacklist registered
[    1.063272] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    1.065267] zbud: loaded
[    1.066036] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.066316] fuse init (API version 7.27)
[    1.066420] pstore: using deflate compression
[    1.068029] Key type asymmetric registered
[    1.068031] Asymmetric key parser 'x509' registered
[    1.068079] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2                                              44)
[    1.068117] io scheduler noop registered
[    1.068119] io scheduler deadline registered
[    1.068160] io scheduler cfq registered (default)
[    1.069135] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.069212] vesafb: mode is 640x480x32, linelength=2560, pages=0
[    1.069213] vesafb: scrolling: redraw
[    1.069216] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.069232] vesafb: framebuffer at 0xe0000000, mapped to 0x(____ptrval____),                                               using 1216k, total 1216k
[    1.069359] Console: switching to colour frame buffer device 80x30
[    1.069375] fb0: VESA VGA frame buffer device
[    1.069398] intel_idle: MWAIT substates: 0x21120
[    1.069400] intel_idle: v0.4.1 model 0x3A
[    1.069516] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.069681] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:0                                              0/input/input0
[    1.069700] ACPI: Power Button [PWRB]
[    1.069753] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/inp                                              ut1
[    1.069764] ACPI: Power Button [PWRF]
[    1.070198] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.090765] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 1655                                              0A
[    1.093598] Linux agpgart interface v0.103
[    1.095578] loop: module loaded
[    1.095838] libphy: Fixed MDIO Bus: probed
[    1.095840] tun: Universal TUN/TAP device driver, 1.6
[    1.095887] PPP generic driver version 2.4.2
[    1.095942] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.095946] ehci-pci: EHCI PCI platform driver
[    1.096175] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.096184] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus numbe                                              r 1
[    1.096202] ehci-pci 0000:00:1a.0: debug port 2
[    1.100110] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.100129] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e08000
[    1.116095] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.116205] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bc                                              dDevice= 4.18
[    1.116208] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=                                              1
[    1.116211] usb usb1: Product: EHCI Host Controller
[    1.116213] usb usb1: Manufacturer: Linux 4.18.0-16-generic ehci_hcd
[    1.116216] usb usb1: SerialNumber: 0000:00:1a.0
[    1.116518] hub 1-0:1.0: USB hub found
[    1.116532] hub 1-0:1.0: 2 ports detected
[    1.117081] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.117091] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus numbe                                              r 2
[    1.117114] ehci-pci 0000:00:1d.0: debug port 2
[    1.121016] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.121039] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e07000
[    1.136091] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.136182] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bc                                              dDevice= 4.18
[    1.136185] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=                                              1
[    1.136188] usb usb2: Product: EHCI Host Controller
[    1.136190] usb usb2: Manufacturer: Linux 4.18.0-16-generic ehci_hcd
[    1.136193] usb usb2: SerialNumber: 0000:00:1d.0
[    1.136505] hub 2-0:1.0: USB hub found
[    1.136519] hub 2-0:1.0: 2 ports detected
[    1.136835] ehci-platform: EHCI generic platform driver
[    1.136855] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.136864] ohci-pci: OHCI PCI platform driver
[    1.136887] ohci-platform: OHCI generic platform driver
[    1.136899] uhci_hcd: USB Universal Host Controller Interface driver
[    1.137116] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    1.137131] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus numbe                                              r 3
[    1.247098] xhci_hcd 0000:03:00.0: hcc params 0x014050cf hci version 0x100 qu                                              irks 0x0000000100000090
[    1.247416] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bc                                              dDevice= 4.18
[    1.247419] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=                                              1
[    1.247421] usb usb3: Product: xHCI Host Controller
[    1.247423] usb usb3: Manufacturer: Linux 4.18.0-16-generic xhci-hcd
[    1.247425] usb usb3: SerialNumber: 0000:03:00.0
[    1.247686] hub 3-0:1.0: USB hub found
[    1.247701] hub 3-0:1.0: 2 ports detected
[    1.247869] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    1.247874] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus numbe                                              r 4
[    1.247879] xhci_hcd 0000:03:00.0: Host supports USB 3.0  SuperSpeed
[    1.250549] usb usb4: We don't know the algorithms for LPM for this host, dis                                              abling LPM.
[    1.250597] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bc                                              dDevice= 4.18
[    1.250600] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=                                              1
[    1.250602] usb usb4: Product: xHCI Host Controller
[    1.250604] usb usb4: Manufacturer: Linux 4.18.0-16-generic xhci-hcd
[    1.250606] usb usb4: SerialNumber: 0000:03:00.0
[    1.250828] hub 4-0:1.0: USB hub found
[    1.250845] hub 4-0:1.0: 2 ports detected
[    1.251056] i8042: PNP: No PS/2 controller found.
[    1.251308] mousedev: PS/2 mouse device common for all mice
[    1.251540] rtc_cmos 00:02: RTC can wake from S4
[    1.251720] rtc_cmos 00:02: registered as rtc0
[    1.251744] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpe                                              t irqs
[    1.251756] i2c /dev entries driver
[    1.251763] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0
[    1.251867] device-mapper: uevent: version 1.0.3
[    1.251954] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-d                                              evel@redhat.com
[    1.251961] intel_pstate: Intel P-state driver initializing
[    1.252057] ledtrig-cpu: registered to indicate activity on CPUs
[    1.252551] NET: Registered protocol family 10
[    1.258785] Segment Routing with IPv6
[    1.258825] NET: Registered protocol family 17
[    1.258886] Key type dns_resolver registered
[    1.259125] RAS: Correctable Errors collector initialized.
[    1.259170] microcode: sig=0x306a9, pf=0x10, revision=0x20
[    1.259219] microcode: Microcode Update Driver: v2.2.
[    1.259238] sched_clock: Marking stable (1259212869, 0)->(1362813329, -103600                                              460)
[    1.259469] registered taskstats version 1
[    1.259480] Loading compiled-in X.509 certificates
[    1.263682] Loaded X.509 cert 'Build time autogenerated kernel key: 71f56ec5e                                              3f39dd32e8c2bb37e2e1415ef8085e8'
[    1.263714] zswap: loaded using pool lzo/zbud
[    1.269427] Key type big_key registered
[    1.269433] Key type trusted registered
[    1.272217] Key type encrypted registered
[    1.272221] AppArmor: AppArmor sha1 policy hashing enabled
[    1.272230] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.272237] ima: Allocated hash algorithm: sha1
[    1.272258] evm: Initialising EVM extended attributes:
[    1.272259] evm: security.selinux
[    1.272260] evm: security.SMACK64
[    1.272261] evm: security.SMACK64EXEC
[    1.272261] evm: security.SMACK64TRANSMUTE
[    1.272262] evm: security.SMACK64MMAP
[    1.272263] evm: security.apparmor
[    1.272264] evm: security.ima
[    1.272265] evm: security.capability
[    1.272266] evm: HMAC attrs: 0x1
[    1.272843]   Magic number: 11:854:572
[    1.272961] rtc_cmos 00:02: setting system clock to 2019-03-28 07:33:35 UTC (                                              1553758415)
[    1.277120] Freeing unused kernel image memory: 2464K
[    1.296084] Write protecting the kernel read-only data: 20480k
[    1.296936] Freeing unused kernel image memory: 2008K
[    1.297421] Freeing unused kernel image memory: 1784K
[    1.313242] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.313243] x86/mm: Checking user space page tables
[    1.328609] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.456081] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.472027] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.510950] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.510968] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM cont                                              rol
[    1.511351] ahci 0000:00:1f.2: version 3.0
[    1.511621] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.511724] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl, 00:01:2e:4e:67:5b, X                                              ID 2c900800, IRQ 27
[    1.511727] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx c                                              hecksumming: ko]
[    1.521721] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x5 imp                                              l SATA mode
[    1.521726] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part                                               ems sxs apst
[    1.540352] scsi host0: ahci
[    1.548040] scsi host1: ahci
[    1.550128] scsi host2: ahci
[    1.550769] scsi host3: ahci
[    1.550852] ata1: SATA max UDMA/133 abar m2048@0xf7e06000 port 0xf7e06100 irq                                               28
[    1.550854] ata2: DUMMY
[    1.550858] ata3: SATA max UDMA/133 abar m2048@0xf7e06000 port 0xf7e06200 irq                                               28
[    1.550859] ata4: DUMMY
[    1.563412] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    1.588783] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    1.612539] usb 4-1: New USB device found, idVendor=1058, idProduct=25a2, bcd                                              Device=10.14
[    1.612543] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.612545] usb 4-1: Product: Elements 25A2
[    1.612547] usb 4-1: Manufacturer: Western Digital
[    1.612549] usb 4-1: SerialNumber: 5758373145363635504C5348
[    1.616484] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcd                                              Device= 0.00
[    1.616488] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.616994] hub 1-1:1.0: USB hub found
[    1.617088] hub 1-1:1.0: 4 ports detected
[    1.624468] usb-storage 4-1:1.0: USB Mass Storage device detected
[    1.625475] scsi host4: usb-storage 4-1:1.0
[    1.625597] usbcore: registered new interface driver usb-storage
[    1.627587] usbcore: registered new interface driver uas
[    1.628323] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcd                                              Device= 0.00
[    1.628327] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.628617] hub 2-1:1.0: USB hub found
[    1.628691] hub 2-1:1.0: 4 ports detected
[    1.867492] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.870386] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.870391] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) fil                                              tered out
[    1.870395] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVER                                              LAY) filtered out
[    1.870739] ata1.00: ATA-8: LITEONIT LCS-256M6S 2.5 7mm 256GB, DC8110C, max U                                              DMA/133
[    1.870743] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.871715] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.871720] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) fil                                              tered out
[    1.871723] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVER                                              LAY) filtered out
[    1.872056] ata1.00: configured for UDMA/133
[    1.872457] scsi 0:0:0:0: Direct-Access     ATA      LITEONIT LCS-256 10C  PQ                                              : 0 ANSI: 5
[    1.872896] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.873066] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238                                               GiB)
[    1.873093] sd 0:0:0:0: [sda] Write Protect is off
[    1.873096] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.873127] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, does                                              n't support DPO or FUA
[    1.873685]  sda: sda1
[    1.874079] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.904089] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    1.916090] usb 2-1.2: new full-speed USB device number 3 using ehci-pci
[    2.031791] usb 2-1.2: New USB device found, idVendor=0403, idProduct=6001, b                                              cdDevice= 6.00
[    2.031795] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber                                              =3
[    2.031798] usb 2-1.2: Product: FT232R USB UART
[    2.031800] usb 2-1.2: Manufacturer: FTDI
[    2.031802] usb 2-1.2: SerialNumber: AL01ZSK7
[    2.080090] tsc: Refined TSC clocksource calibration: 1496.602 MHz
[    2.080100] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x159298a4                                              d16, max_idle_ns: 440795254665 ns
[    2.080116] clocksource: Switched to clocksource tsc
[    2.094476] usb 1-1.1: New USB device found, idVendor=0bc2, idProduct=331a, b                                              cdDevice= 9.11
[    2.094480] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber                                              =3
[    2.094482] usb 1-1.1: Product: Expansion Desk
[    2.094484] usb 1-1.1: Manufacturer: Seagate
[    2.094487] usb 1-1.1: SerialNumber: NA8X2ATM
[    2.095470] scsi host5: uas
[    2.096465] scsi 5:0:0:0: Direct-Access     Seagate  Expansion Desk   0911 PQ                                              : 0 ANSI: 6
[    2.098252] sd 5:0:0:0: Attached scsi generic sg1 type 0
[    2.099213] sd 5:0:0:0: [sdb] 7814037167 512-byte logical blocks: (4.00 TB/3.                                              64 TiB)
[    2.099217] sd 5:0:0:0: [sdb] 4096-byte physical blocks
[    2.099583] sd 5:0:0:0: [sdb] Write Protect is off
[    2.099586] sd 5:0:0:0: [sdb] Mode Sense: 53 00 00 08
[    2.100084] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, does                                              n't support DPO or FUA
[    2.106073] random: fast init done
[    2.112027] usb 2-1.3: new high-speed USB device number 4 using ehci-pci
[    2.172066] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[    2.179878]  sdb: sdb1 sdb2
[    2.180399] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.180419] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.180441] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.182836] sd 5:0:0:0: [sdb] Attached SCSI disk
[    2.186974] ata3: SATA link down (SStatus 0 SControl 300)
[    2.224763] usb 2-1.3: New USB device found, idVendor=1a40, idProduct=0101, b                                              cdDevice= 1.11
[    2.224767] usb 2-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber                                              =0
[    2.224770] usb 2-1.3: Product: USB 2.0 Hub
[    2.225155] hub 2-1.3:1.0: USB hub found
[    2.225212] hub 2-1.3:1.0: 4 ports detected
[    2.281118] usb 1-1.2: New USB device found, idVendor=1a40, idProduct=0101, b                                              cdDevice= 1.11
[    2.281122] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber                                              =0
[    2.281124] usb 1-1.2: Product: USB 2.0 Hub
[    2.281508] hub 1-1.2:1.0: USB hub found
[    2.281706] hub 1-1.2:1.0: 4 ports detected
[    2.360089] usb 1-1.3: new high-speed USB device number 5 using ehci-pci
[    2.468829] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=0129, b                                              cdDevice=39.60
[    2.468832] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber                                              =3
[    2.468835] usb 1-1.3: Product: USB2.0-CRW
[    2.468837] usb 1-1.3: Manufacturer: Generic
[    2.468839] usb 1-1.3: SerialNumber: 20100201396000000
[    2.477514] usbcore: registered new interface driver rtsx_usb
[    2.552040] usb 1-1.4: new full-speed USB device number 6 using ehci-pci
[    2.583752] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:                                               (null)
[    2.612090] usb 2-1.3.3: new high-speed USB device number 5 using ehci-pci
[    2.656739] scsi 4:0:0:0: Direct-Access     WD       Elements 25A2    1014 PQ                                              : 0 ANSI: 6
[    2.657205] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    2.657331] sd 4:0:0:0: [sdc] 1953458176 512-byte logical blocks: (1.00 TB/93                                              1 GiB)
[    2.658338] sd 4:0:0:0: [sdc] Write Protect is off
[    2.658341] sd 4:0:0:0: [sdc] Mode Sense: 47 00 10 08
[    2.659170] sd 4:0:0:0: [sdc] No Caching mode page found
[    2.659177] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[    2.663812]  sdc: sdc1
[    2.664471] usb 1-1.4: New USB device found, idVendor=8087, idProduct=07da, b                                              cdDevice=78.69
[    2.664474] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber                                              =0
[    2.666100] sd 4:0:0:0: [sdc] Attached SCSI disk
[    2.746077] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SEL                                              INUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +                                              XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybr                                              id)
[    2.764290] systemd[1]: Detected architecture x86-64.
[    2.768225] systemd[1]: Set hostname to <sascha-htpc-ubuntu>.
[    2.822360] usb 2-1.3.3: New USB device found, idVendor=1058, idProduct=107c,                                               bcdDevice=10.42
[    2.822364] usb 2-1.3.3: New USB device strings: Mfr=2, Product=3, SerialNumb                                              er=1
[    2.822366] usb 2-1.3.3: Product: Elements 107C
[    2.822369] usb 2-1.3.3: Manufacturer: Western Digital
[    2.822371] usb 2-1.3.3: SerialNumber: 574343344E504B3656465346
[    2.822784] usb-storage 2-1.3.3:1.0: USB Mass Storage device detected
[    2.826776] scsi host6: usb-storage 2-1.3.3:1.0
[    2.840024] usb 1-1.2.2: new high-speed USB device number 7 using ehci-pci
[    2.932382] systemd[1]: Created slice System Slice.
[    2.932569] systemd[1]: Listening on fsck to fsckd communication Socket.
[    2.932646] systemd[1]: Listening on udev Kernel Socket.
[    2.932730] systemd[1]: Listening on RPCbind Server Activation Socket.
[    2.932939] systemd[1]: Created slice User and Session Slice.
[    2.932957] systemd[1]: Reached target Slices.
[    2.933070] systemd[1]: Listening on udev Control Socket.
[    2.971510] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[    2.980232] lp: driver loaded but no devices found
[    2.993714] ppdev: user-space parallel port driver
[    3.007305] usb 2-1.3.4: new high-speed USB device number 6 using ehci-pci
[    3.059678] RPC: Registered named UNIX socket transport module.
[    3.059680] RPC: Registered udp transport module.
[    3.059681] RPC: Registered tcp transport module.
[    3.059682] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.060701] usb 1-1.2.2: New USB device found, idVendor=2040, idProduct=0265,                                               bcdDevice= 1.00
[    3.060705] usb 1-1.2.2: New USB device strings: Mfr=3, Product=1, SerialNumb                                              er=2
[    3.060707] usb 1-1.2.2: Product: dualHD
[    3.060709] usb 1-1.2.2: Manufacturer: HCW
[    3.060711] usb 1-1.2.2: SerialNumber: 0013962996
[    3.107100] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    3.221198] usb 2-1.3.4: New USB device found, idVendor=1058, idProduct=25a2,                                               bcdDevice=10.04
[    3.221202] usb 2-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumb                                              er=3
[    3.221204] usb 2-1.3.4: Product: Elements 25A2
[    3.221207] usb 2-1.3.4: Manufacturer: Western Digital
[    3.221209] usb 2-1.3.4: SerialNumber: 575844314133354B48544559
[    3.221492] usb-storage 2-1.3.4:1.0: USB Mass Storage device detected
[    3.229912] systemd-journald[304]: Received request to flush runtime journal                                               from PID 1
[    3.240025] usb 1-1.2.3: new high-speed USB device number 8 using ehci-pci
[    3.241572] scsi host7: usb-storage 2-1.3.4:1.0
[    3.449326] usb 1-1.2.3: New USB device found, idVendor=2040, idProduct=0265,                                               bcdDevice= 1.00
[    3.449330] usb 1-1.2.3: New USB device strings: Mfr=3, Product=1, SerialNumb                                              er=2
[    3.449332] usb 1-1.2.3: Product: dualHD
[    3.449334] usb 1-1.2.3: Manufacturer: HCW
[    3.449336] usb 1-1.2.3: SerialNumber: 0013942429
[    3.594252] random: crng init done
[    3.594255] random: 7 urandom warning(s) missed due to ratelimiting

Alles anzeigen

Ubuntu 18.04 - Finde im Netzwerk den Ubuntu PC nicht?

Jetzt mitmachen!

Benutzer online in diesem Thema

Sony BRAVIA	androidtv 9	Kodi 20.0 (maven)
Chromecast mit Google TV	androidtv 12	Kodi 21.0