Ambilight am ODROID-C2 unter LibreElec

// Automatically generated configuration file for 'Hyperion daemon'
// Generated by: HyperCon (The Hyperion deamon configuration file builder)
// Created with HyperCon V1.02.2 (05.04.2016)


{
	/// Device configuration contains the following fields: 
	/// * 'name'       : The user friendly name of the device (only used for display purposes)
	/// * 'type'       : The type of the device or leds (known types for now are
	/// ---------SPI---------, APA102, WS2801, P9813, LPD6803, LPD8806, ---------PWM---------, WS2812b (just RPi1), WS281X (RPi1, RPi2, RPi3), --------OTHER--------, PhilipsHUE, AtmoOrb, PiBlaster, Tinkerforge, FadeCandy, UDP, RawHID (USB), SEDU, Adalight, AdalightAPA102, TPM2, USBASP-WS2801, USBASP-WS2812, ------3rd PARTY------, AmbiLed, Atmo, Lightpack, Multi-Lightpack, Paintpack, Test (file), None)
	/// * [device type specific configuration]
	/// * 'colorOrder' : The order of the color bytes ('rgb', 'rbg', 'bgr', etc.).
	"device" :
	{
		"name"       : "MyHyperionConfig",
		"type"       : "ws2801",
		"output"     : "/dev/spidev0.0",
		"rate"     : 1000000,
		"colorOrder" : "rgb"
	},


	/// Color manipulation configuration used to tune the output colors to specific surroundings. 
	/// The configuration contains a list of color-transforms. Each transform contains the 
	/// following fields:
	///  * 'channelAdjustment'
	///  * 'id'   : The unique identifier of the channel adjustments (eg 'device_1')
	///  * 'leds'   : The indices (or index ranges) of the leds to which this channel adjustment applies
	///             (eg '0-5, 9, 11, 12-17'). The indices are zero based.
	///  * 'pureRed'/'pureGreen'/'pureBlue' : The manipulation in the Red-Green-Blue color domain with the 
	///                           following tuning parameters for each channel:
	///  * 'temperature'
	///  * 'id'   : The unique identifier of the temperature (eg 'device_1')
	///  * 'leds'   : The indices (or index ranges) of the leds to which this temperature applies
	///             (eg '0-5, 9, 11, 12-17'). The indices are zero based.
	///  * 'red'/'green'/'blue' : The temperature manipulation in the Red-Green-Blue color domain with the 
	///                           following tuning parameters for each channel:
	///  * 'transform'
	///  * 'id'   : The unique identifier of the color transformation (eg 'device_1')
	///  * 'leds' : The indices (or index ranges) of the leds to which this color transform applies
	///             (eg '0-5, 9, 11, 12-17'). The indices are zero based.
	///  * 'hsv' : The manipulation in the Hue-Saturation-Value color domain with the following 
	///            tuning parameters:
	///            - 'saturationGain'  The gain adjustement of the saturation
	///            - 'luminanceGain'       The gain adjustement of the luminance
	///  * 'red'/'green'/'blue' : The manipulation in the Red-Green-Blue color domain with the 
	///                           following tuning parameters for each channel:
	///            - 'threshold'       The minimum required input value for the channel to be on 
	///                                (else zero)
	///            - 'gamma'           The gamma-curve correction factor
	///
	/// Next to the list with color transforms there is also a smoothing option.
	///  * 'smoothing' : Smoothing of the colors in the time-domain with the following tuning 
	///                  parameters:
	///            - 'type'            The type of smoothing algorithm ('linear' or 'none')
	///            - 'time_ms'         The time constant for smoothing algorithm in milliseconds
	///            - 'updateFrequency' The update frequency of the leds in Hz
	///            - 'updateDelay'     The delay of the output to leds (in periods of smoothing)
	"color" :
	{
		"channelAdjustment" :
		[
			{
				"id"   : "default",
				"leds" : "*",
				"pureRed" :
				{
					"redChannel"		: 255,
					"greenChannel"		: 35,
					"blueChannel"		: 10
				},
				"pureGreen" :
				{
					"redChannel"		: 155,
					"greenChannel"		: 255,
					"blueChannel"		: 10
				},
				"pureBlue" :
				{
					"redChannel"		: 10,
					"greenChannel"		: 110,
					"blueChannel"		: 255
				}
			}
		],
		"temperature" :
		[
			{
				"id"   : "default",
				"leds" : "*",
				"temperatureValues" :
				{
					"red" 		: 255,
					"green"		: 255,
					"blue" 		: 255
					///default 	: 255,255,255
				}
			}
		],
		"transform" :
		[
			{
				"id"   : "default",
				"leds" : "*",
				"hsl" :
				{
					"saturationGain"	: 1.0000,
					"luminanceGain"		: 1.0000
					///default		   	: 1.0000, 1.0000
				},
				"red" :
				{
					"threshold" 	: 0.0000,
					"gamma"     	: 2.2500
					///default		: 0.0000, 2.5000
				},
				"green" :
				{
					"threshold" 	: 0.0000,
					"gamma"     	: 2.5000
					///default		: 0.0000, 2.7500
				},
				"blue" :
				{
					"threshold" 	: 0.0000,
					"gamma"     	: 2.7500
					///default		: 0.0000, 3.0000
				}
			}
		],


		"smoothing" :
		{
			"type"            : "linear",
			"time_ms"         : 100,
			"updateFrequency" : 15.0000,
			"updateDelay"     : 0
		}
	},


	/// The black border configuration, contains the following items: 
	///  * enable    			: true if the detector should be activated
	///  * threshold 			: Value below which a pixel is regarded as black (value between 0.0 and 1.0)
	///  * unknownFrameCnt		: Number of frames without any detection before the border is set to 0 (default 600)
	///  * borderFrameCnt		: Number of frames before a consistent detected border gets set (default 50)
	///  * maxInconsistentCnt 	: Number of inconsistent frames that are ignored before a new border gets a chance to proof consistency
	///  * blurRemoveCnt		: Number of pixels that get removed from the detected border to cut away blur (default 1)
	///  * mode 				: Border detection mode (values=default,classic,osd)
	"blackborderdetector" : 
	{
		"enable" : true,
		"threshold" : 0.01,
		"unknownFrameCnt" : 600,
		"borderFrameCnt" : 50,
		"maxInconsistentCnt" : 10,
		"blurRemoveCnt" : 1,
		"mode" : "default"
	},


	/// The configuration of the effect engine, contains the following items: 
	///  * paths		: An array with absolute location(s) of directories with effects 
	///  * color 		: Set static color after boot -> set effect to "" (empty) and input the values [R,G,B] and set duration_ms NOT to 0 (use 1) instead 
	///  * effect 		: The effect selected as 'boot sequence' 
	///  * duration_ms	: The duration of the selected effect (0=endless) 
	///  * priority 	: The priority of the selected effect/static color (default=990) HINT: lower value result in HIGHER priority! 
	"effects" : 
	{
		"paths" : 
		[
			"/storage/hyperion/effects"
		]
	},


	"bootsequence" : 
	{
		"color" : [0,0,0],
		"effect" : "Knight rider",
		"duration_ms" : 3000,
		"priority" : 990
	},


	/// The configuration of the Json/Proto forwarder. Forward messages to multiple instances of Hyperion on same and/or other hosts 
	/// 'proto' is mostly used for video streams and 'json' for effects 
	///  * proto	: Proto server adress and port of your target. Syntax:[IP:PORT] -> ["127.0.0.1:19447"] or more instances to forward ["127.0.0.1:19447","192.168.0.24:19449"] 
	///  * json	: Json server adress and port of your target. Syntax:[IP:PORT] -> ["127.0.0.1:19446"] or more instances to forward ["127.0.0.1:19446","192.168.0.24:19448"] 
	///  HINT:	If you redirect to "127.0.0.1" (localhost) you could start a second hyperion with another device/led config!
	/// 		Be sure your client(s) is/are listening on the configured ports. The second Hyperion (if used) also needs to be configured! (HyperCon -> External -> Json Server/Proto Server)
// 	"forwarder" : 
// 	{
// 		"proto" : ["127.0.0.1:19447"],
// 		"json" : ["127.0.0.1:19446"]
// 	},


	///  The configuration for the frame-grabber, contains the following items: 
	///   * width        : The width of the grabbed frames [pixels]
	///   * height       : The height of the grabbed frames [pixels]
	///   * frequency_Hz : The frequency of the frame grab [Hz]
	///   * priority     : The priority of the frame-gabber (Default=890) HINT: lower value result in HIGHER priority! 
	///   * ATTENTION    : Power-of-Two resolution is not supported and leads to unexpected behaviour! 
	"framegrabber" : 
	{
		"width" : 64,
		"height" : 64,
		"frequency_Hz" : 10.0,
		"priority" : 800
	},


	/// The configuration of the Kodi connection used to enable and disable the frame-grabber. Contains the following fields: 
	///  * xbmcAddress       : The IP address of the Kodi-host
	///  * xbmcTcpPort       : The TCP-port of the Kodi-server
	///  * grabVideo         : Flag indicating that the frame-grabber is on(true) during video playback
	///  * grabPictures      : Flag indicating that the frame-grabber is on(true) during picture show
	///  * grabAudio         : Flag indicating that the frame-grabber is on(true) during audio playback
	///  * grabMenu          : Flag indicating that the frame-grabber is on(true) at the Kodi menu
	///  * grabScreensaver   : Flag indicating that the frame-grabber is on(true) when Kodi is on screensaver
	///  * enable3DDetection : Flag indicating that the frame-grabber should switch to a 3D compatible modus if a 3D video is playing
	"xbmcVideoChecker" : 
	{
		"xbmcAddress" : "127.0.0.1",
		"xbmcTcpPort" : 9090,
		"grabVideo" : true,
		"grabPictures" : true,
		"grabAudio" : false,
		"grabMenu" : false,
		"grabScreensaver" : false,
		"enable3DDetection" : false
	},


	/// The configuration of the Json server which enables the json remote interface
	///  * port : Port at which the json server is started
	"jsonServer" : 
	{
		"port" : 19444
	},


	/// The configuration of the Proto server which enables the protobuffer remote interface
	///  * port : Port at which the protobuffer server is started
	"protoServer" : 
	{
		"port" : 19445
	},


	/// The configuration of the boblight server which enables the boblight remote interface
	///  * port 	: Port at which the boblight server is started
	///  * priority: Priority of the boblight server (Default=900) HINT: lower value result in HIGHER priority! 
// 	"boblightServer" : 
// 	{
// 		"port" : 19333,
// 		"priority" : 900
// 	},


	/// Configuration for the embedded V4L2 grabber
	///  * device          : V4L2 Device to use [default="/dev/video0"]
	///  * input           : V4L2 input to use [default=0]
	///  * standard        : Video standard (no-change/PAL/NTSC) [default="no-change"]
	///  * width                : V4L2 width to set [default=-1]
	///  * height               : V4L2 height to set [default=-1]
	///  * frameDecimation      : Frame decimation factor [default=2]
	///  * sizeDecimation       : Size decimation factor [default=8]
	///  * priority             : Hyperion priority channel [default=900]
	///  * mode                 : 3D mode to use 2D/3DSBS/3DTAB (note: no autodetection) [default="2D"]
	///  * cropLeft             : Cropping from the left [default=0]
	///  * cropRight            : Cropping from the right [default=0]
	///  * cropTop              : Cropping from the top [default=0]
	///  * cropBottom           : Cropping from the bottom [default=0]
	///  * redSignalThreshold   : Signal threshold for the red channel between 0.0 and 1.0 [default=0.0]
	///  * greenSignalThreshold : Signal threshold for the green channel between 0.0 and 1.0 [default=0.0]
	///  * blueSignalThreshold  : Signal threshold for the blue channel between 0.0 and 1.0 [default=0.0]
// 	"grabber-v4l2" : 
// 	{
// 		"device" : "/dev/video0",
// 		"input" : 0,
// 		"standard" : "no-change",
// 		"width" : -1,
// 		"height" : -1,
// 		"frameDecimation" : 2,
// 		"sizeDecimation" : 8,
// 		"priority" : 900,
// 		"mode" : "2D",
// 		"cropLeft" : 0,
// 		"cropRight" : 0,
// 		"cropTop" : 0,
// 		"cropBottom" : 0,
// 		"redSignalThreshold" : 0.0,
// 		"greenSignalThreshold" : 0.0,
// 		"blueSignalThreshold" : 0.0
// 	},


	///  The configuration for each individual led. This contains the specification of the area 
	///  averaged of an input image for each led to determine its color. Each item in the list 
	///  contains the following fields:
	///  * index: The index of the led. This determines its location in the string of leds; zero 
	///           being the first led.
	///  * hscan: The fractional part of the image along the horizontal used for the averaging 
	///           (minimum and maximum inclusive)
	///  * vscan: The fractional part of the image along the vertical used for the averaging 
	///           (minimum and maximum inclusive)
	"leds" : 
	[
		{
			"index" : 0,
			"hscan" : { "minimum" : 0.9851, "maximum" : 1.0000 },
			"vscan" : { "minimum" : 0.0000, "maximum" : 0.0400 }
		},
		{
			"index" : 1,
			"hscan" : { "minimum" : 0.9701, "maximum" : 0.9851 },
			"vscan" : { "minimum" : 0.0000, "maximum" : 0.0400 }
		},
		{
			"index" : 2,
			"hscan" : { "minimum" : 0.9552, "maximum" : 0.9701 },
			"vscan" : { "minimum" : 0.0000, "maximum" : 0.0400 }
		},
		{
			"index" : 3,
			"hscan" : { "minimum" : 0.9403, "maximum" : 0.9552 },
			"vscan" : { "minimum" : 0.0000, "maximum" : 0.0400 }
		},
		{
			"index" : 4,
			"hscan" : { "minimum" : 0.9254, "maximum" : 0.9403 },
			"vscan" : { "minimum" : 0.0000, "maximum" : 0.0400 }
		},
		{
			"index" : 5,
			"hscan" : { "minimum" : 0.9104, "maximum" : 0.9254 },
			"vscan" : { "minimum" : 0.0000, "maximum" : 0.0400 }
		},
		{
			"index" : 6,
			"hscan" : { "minimum" : 0.8955, "maximum" : 0.9104 },
			"vscan" : { "minimum" : 0.0000, "maximum" : 0.0400 }
		},
		{
			"index" : 7,
			"hscan" : { "minimum" : 0.8806, "maximum" : 0.8955 },
			"vscan" : { "minimum" : 0.0000, "maximum" : 0.0400 }
		},
		{
			"index" : 8,
			"hscan" : { "minimum" : 0.8657, "maximum" : 0.8806 },
			"vscan" : { "minimum" : 0.0000, "maximum" : 0.0400 }
		},
		{
			"index" : 9,
			"hscan" : { "minimum" : 0.8507, "maximum" : 0.8657 },
			"vscan" : { "minimum" : 0.0000, "maximum" : 0.0400 }
		},
		{
			"index" : 10,
			"hscan" : { "minimum" : 0.8358, "maximum" : 0.8507 },
			"vscan" : { "minimum" : 0.0000, "maximum" : 0.0400 }
		},
		{
			"index" : 11,
			"hscan" : { "minimum" : 0.8209, "maximum" : 0.8358 },
			"vscan" : { "minimum" : 0.0000, "maximum" : 0.0400 }
		}


[restliche LEDs aus platzgründen gekürzt]
	],


	"endOfJson" : "endOfJson"
}

// NO V4L2 GRABBER CONFIG
	// FRAME GRABBER CONFIG
	"framegrabber" : 
	{
		"width" : 64,
		"height" : 64,
		"frequency_Hz" : 20.0,
		"priority" : 890
	},


	// AML GRABBER CONFIG
	"amlgrabber" : 
	{
		"width" : 64,
		"height" : 64,
		"frequency_Hz" : 24.0,
		"priority" : 890
	},