Genau das habe ich versuch so wie ich es schon früher gemacht habe... damals noch auf einem Raspberry Pi hat es funktioniert
So sehen meine Dateien aus:
Code: lircd.conf
# Please make this file available to others
# by sending it to <lirc@bartelmus.de>
#
# this config file was automatically generated
# using lirc-0.9.1-git(default) on Sat Jun 4 20:29:07 2016
#
# contributed by Sambito
#
# brand: AppleRemote
# model no. of remote control: A1294
# devices being controlled by this remote: RaspberryPi & RemotePi Board
#
begin remote
name appleremote
bits 8
flags SPACE_ENC|CONST_LENGTH
eps 30
aeps 100
header 9048 4434
one 586 1634
zero 586 536
ptrail 584
pre_data_bits 16
pre_data 0x77E1
post_data_bits 8
post_data 0x78
gap 107001
toggle_bit_mask 0x0
begin codes
KEY_UP 0xD0
KEY_DOWN 0xB0
KEY_LEFT 0x10
KEY_RIGHT 0xE0
KEY_OK 0xBA 0x20
KEY_EXIT 0x40
KEY_PLAYPAUSE 0x7A 0x20
end codes
end remoteCode: lircmap.xml
<lircmap>
<remote device="appleremote">
<up>KEY_UP</up>
<down>KEY_DOWN</down>
<left>KEY_LEFT</left>
<right>KEY_RIGHT</right>
<play>KEY_PLAYPAUSE</play>
<back>KEY_EXIT</back>
<select>KEY_OK</select>
</remote>
</lircmap>Code: remote.xml
<[definition='3','0']keymap[/definition]>
<global>
<remote>
<back>Back</back>
</remote>
</global>
<FullscreenVideo>
<remote>
<back>Stop</back>
</remote>
</FullscreenVideo>
</[definition='3','0']keymap[/definition]>Ich habe die Dateien im Pfad ~/.kodi/userdata/keymaps erstellt... es ändert sich aber nix... die werden scheinbar nicht genutzt