LibreELEC 9 Kodi 18 Xbox One Fernbedienung

################################################################################
# This file is part of LibreELEC - http://www.libreelec.tv
# Copyright (C) 2016 Team LibreELEC
#
# LibreELEC is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 2 of the License, or
# (at your option) any later version.
#
# LibreELEC is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with LibreELEC. If not, see <http://www.gnu.org/licenses/>.
################################################################################
# Bootloader configuration - config.txt
################################################################################

################################################################################
# Memory (System/GPU configuration )
################################################################################

# Default GPU memory split (do not change if you do not know what you are doing)
gpu_mem=128

# Configure GPU memory based on SDRAM size - overrides above setting
gpu_mem_256=112
gpu_mem_512=160
gpu_mem_1024=256

################################################################################
# For overclocking and various other settings, see:
# https://www.raspberrypi.org/documentation/…n/config-txt.md
################################################################################
# Set 'force_turbo=1' to disable dynamic overclocking and enable overclocking always.
force_turbo=0

# Make display smaller to stop text spilling off the screen
#
# Note that the overscan settings only affect the splash screen and not Kodi.
#
# If you experience overscan/underscan issues the best solution is to adjust
# your TV settings ("full pixel", "1-1 pixel" etc.). Alternatively, there is a
# calibration menu in the Kodi GUI.
# disable_overscan=1

# Force HDMI even if unplugged or powered off
# hdmi_force_hotplug=1

# Doesn't sent initial active source message.
# Avoids bringing CEC (enabled TV) out of standby and channel switch when
# rebooting.
hdmi_ignore_cec_init=1

################################################################################
# License keys to enable GPU hardware decoding for various codecs
# to obtain keys visit the shop at http://www.raspberrypi.com
################################################################################

# decode_MPG2=0x00000000
# decode_WVC1=0x00000000

################################################################################
# End of default configuration
################################################################################

################################################################################
# Include distribution specific config file if it exists.
################################################################################
[all]
include distroconfig.txt

# Sinnfreien Regenbogen-Splash deaktivieren
disable_splash=1

# Mehr Strom für USB-Ports
max_usb_current=1

# Fernbedienung
dtoverlay=lirc-rpi